14 results in 0.0121 seconds.
-
-
problem with 2120j
hello
i have a problem with sharp ar 2120j.
duplex motor or exit roller motor not act or not enterprise(duplex motor is healthy,because... -
workcentre pro 275 duplex motor
In 330 my duplex motor runs fine in low but in high cuts out sporadically. Has anyone seen this? Is it the motor or the driver board? -
irc 5185-duplex
Good afternoon! Getting 0205,0105 jams-ltr size paper only-duplex. A tech has already replaced dc controller 2-seems as though that was temporary solution.... -
MPC2500 Phantom Jams From Bypass
Just after some help or ideas. Ive got an MPC2500 with phantom jams from the bypass, the machine says its jammed in the side door but there is never any... -
IR 3300 Jam code 0A01
I have an IR3300 that jams intermittently. The customer tells me it is always when she is doing 2-sided copying. Most of the jam codes are 0A05. With... -
DP3510 Half print out
Hai all,need help.
Problem:
When using Df, the print out is half only,but when i use the plattern glass ,the print out is full page.
... -
duplex problem e-studio45
hi to all my friend
duplex is not working for mor than 1 paper and i heared some noise in duplex
when i open duplex and turn on the machine... -
C4080
I had this last call today with a iRC4008 jamming while doing duplexing with legal paper size only. It does not jam with LTR size paper whether it single... -
iR-C3200 Duplex Jam 010A, no duplex motor...
The motor for the rollers right as the paper is going to go under the fuser does not come on. It works fine in component test mode. It does come on while... -
IRC3200 0205 Duplex jamming
I have a machine that reads a 0205 Jam code when running multiple pages duplexed. If i run one copy it runs fine. There is always one page halfway through... -
AR-M205 The motor of duplex RMOTS0042QSZZ cracks
I have, that on all new devices, at the press of the second party of a copy, the crash of the motor of a duplex is audible. As a result – jamming.... -
Ricoh aficio 2105 duplex jam
Hi people. Have problem with jam in duplex entrance. Mashine is general clean, but if you try to copy two sided every paper stay at duplex (jam code 21... -
AR-M208 Duplex Jams
2-2 copying, paper stops in the middle of the right drawer transport during the second pass. Replaced sensors and rotten plastic transports above fuser....
