Search Result
Collapse
29 results in 0.0222 seconds.
Keywords
Members
Tags
-
TU 510 issues
TU 510 will jam when anything smaller than 11x17 when trying to cut/trim. All sizes pass if not trimming. J-7739. We have tried various levels of F/W,... -
I Series C250i C360i Stuck At 25%
Hi ,
Recently few unit of our rental machine C250i facing freeze screen , stuck at boot screen .
We tried update to latest firmware... -
IM C300 SC670-02 error
it only happens through the DF or scanning from the glass, you hit the start button it pauses for a second and then SC670-02 comes all the time. But... -
C-360i, boot up issues...
Hey guys...does anyone know the back door (if any) to get into the service mode? I did an Initialization and now the machine won't let me in SM any longer.... -
Follow up to C454e not recognizing FS534
Ok so went back out and replaced the FN main board, added surge protector and machine & FN worked fine. It had very old firmware so of course I couldn't...Last edited by copyman; 01-18-2023, 11:18 PM. -
Bizhub C-368, unable to take F/W... UPDATE
Hey guys. So this machine, as others in the past that I've had trouble with, would not take F/W, regardless of how I was doing it, trying all the other... -
Biz C224e F/W function ver 7
Hi,
All my customers 4E series have the G20-M1 firmware installed from 2016. I see there is a new F/W GDS-M1 from Feb 2022. Should this be... -
C-368, not able to update F/W
Hey guys....
So, this is not the first machine I've seen that would simply not take F/W. The machine goes into the regular boot up screen... -
[Kyocera Ecosys M5521CDW] - WPA3 ?
Hi,
Any f/w update in sight with WPA3 support ? -
C-364 won't take firmware....
Hey guys.
I've run into this kind of thing before, both with the regular 4 series and with the "e" series as well.
... -
C224 fax kit
Hi everyone,
I have one fax kit FK511, attempt to install on one C224 ( F/W G00-XX ).
When I restarted the machine, CB003 display during... -
C550i f/w update
Hi. Various post about F/W not updating/ not booting up. Is it the memory board (the one with the heatsink) or the rectangle storage board that is fixed... -
C-364e, not accepting firmware above J6...
There's been a long time problem with updating F/W on this series machine... the machine will try to load "K" (for example) and stop and give... -
MS 710dn Legacy firmware ??
I don't think I've visited the Lexmark forum in the past, I pretty much deal exclusively with Ricoh.... so HELLO all!.
So, I've created...