This is not a new post but i need to know if there is anyway to setup printing defaults to face up
My printer is the one mentioned in the...
86 results in 0.0207 seconds.
-
Color c60 - internal controller- face up printing
-
MP7500 Face up output
Hi!
Can anybody please tell me how to output face up copies when copying from the ADF, so that the copies come out in reverse order?
... -
Need ideas on how to copy/print so that output comes face up on a konica bizhub 282
out of ideas/ Need a hand if anyone has any ideas. Print I can make work in copy mode by setting duplex 2 to 2 and set the original face down but this... -
Imagepress c1 jamming when face down printing a3 /sra3
help got a problem on a lovely c1 !
when printing on a3 or sra3 stock face down print it has a kink in the page about 3 quarters down... -
iR 5070 dog's ears via fuser
It only does it on heavy paper - and not always. I got to test it, copies were fine. A few min later, it started curling the lead edge corners down (front... -
CS-300ci with DF-760(B) Finisher -- Output Tray Issue
I have a CS-300ci with Finisher DF-760(B), I can set up the Output tray for printing to come out on the main Finisher tray, Face up, but when I try to... -
GP605 (iR600) 010C jam
I constantly get jam, when using duplex copy, code 010C witch indicate that there is delay to PS10 sensor (external delivery sensor). Here is a picture... -
Face up Print/Scan
Dear All,
The Above Subject is Face up Print and Copy from ADF
I have Nashuatec MP C 7500 machines in total 30.By dafault Print and Copy from... -
ARM355 printing issue
Have a customer that is trying to print on Monarch size envelope using Word 2007 in Windows 7. Have the newest firmware and PCL6 driver installed. Using... -
MPC-7500 face up copying without going to inverter
hi dear
My mpc - 7500 while copying is always going to inverter unit that causes jams
is coming out from face down. I won't have idea... -
Faceup or Facedown?
Hello,
on a newly installed C280 we'd like to keep tray 2 for letterheaded paper but cannot get it to print on the correct face both 2-sided... -
roller indentions
ok, Ive got a c6500 that likes to put roller indentions first 5mm and 3 inches after, only on ltr paper. does not mater paper type nor weight. face down... -
iRC3220 Double sided solution
Hi, I have a customer that uses headed paper. The iRC copies side 'A' first on single sided copying and copies on side 'B' first when duplexing.
... -
-
is face-up printing possible?
I'd like to run the Kyo 620 as a printer (its almost all they do) and have it output face-up (no intermittent jamming as the machine inverts the print).......
