16 results in 0.0258 seconds.
-
MX-FN22 saddle skew
Anyone ever have to adjust the skew of 11x17 after saddle stitch has taken place? When you look at the folded print, the top line of paper doesn't line... -
FS532/SD woes
11x17, 5 internal pages are plain, outer page is 100# coated text. Cover is hanging up and getting folded about 4 inches off, internal 5 pages are folded... -
DF 7110-- placing extra blank page dead center of booklet
One of our customers has a cs5052ci with a 4000 (df-7110) sheet finisher that contains a booklet maker.
They called last week because the... -
KM 6500 with Heavy Duty Booklet Maker (9x12) in any Drawer...
Greetings,
Please tell me if the KM 6500 will accept 9x12 inch sheets in any drawer to make 5.5x8.5 Saddle Stitched Books with Bleed. I... -
654e with FS-535 jamming at SD unit
I don't get stumped often, in fact it has not happened for years.
This has me baffled.
A3 fed straight out of either tray... -
Workcenter 7232 Folding around Transfer area...
I can't duplicate the problem. No Jam code because feeding through "Folded" I posted a picture (Fed through LEF) folded where deletion is. I... -
Corner of paper folded over Canon c7055
When printing long edge first the leading edge top corner is occasionally folded over. This doesn't happen every page and is printed over so I am assuming... -
folded paper Docucolor 2240
Hello friends Copytech
I have a problem with my DocuColor 2240 ; prints all very well from trays 1-4 , but when I want to print using manual feed... -
J17-06 on C500
Getting a pretty persistent jam from tray1, was wondering if anyone can help. Thought maybe the rubbers needed cleaning, tried that to no avail.
... -
H.C.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!
We just had our annual benefits meeting here where I am discoving my premiums will go up about 100 dollars a month.
Anybody else...Last edited by Jimbo1; 09-23-2010, 09:12 PM. -
-
canon ir 550
This problem is in regards to colored paper. When the customer runs 20lb colored stock yellow, red ,orange the paper comes out with the lead edge top... -
bizhub 420 duplex jamming
we have a bizhub in the field with 550k jamming here and there. but it will not duplex. simplex is fine.
the jam I thought was out of tray 1.... -
You guys need a good laugh. Ready? Envelopes!!!!!!
Sigh.....I have this customer that's a law firm. They have a KM-3050 and insist on running #10 envelopes through the bypass. Of course this works well... -
taskaphla500
hi ! i have jam problem j89 when ever i selected booklet mode print from pc the paper will stucked in internal finisher , it look paper folded half way...
