Good day Bizhub 227
Printing is performed from the Linux environment without using a driver. There are 2 printable forms of the report.
...
111 results in 0.0284 seconds.
-
Understanding Form 2553: Key to Electing S Corporation Status for Small Businesses
Form 2553, known as "Election by a Small Business Corporation," is essential for U.S. businesses choosing to be treated as an S corporation... -
Prescribe command to move the print image left to right and up and down
i have a customer that prints on a pre-printed form "HEALTH INSURANCE claim form cms 1500"
the print information comes out a litte to... -
C9070 print quality
My I.T. guy just showed me some samples, poor print quality on a 9070
One printed on a Mac, other printed on a PC. BOTH exhibit the same issue.... -
-
Canon IR adv.4235
Good morning,I have a Canon IR adv. 4235 that was made without a finisher. Can I install an inner finisher D1 form another IR 4235 into that machine?... -
Xerox 7665 "The machine is not available. Network Controller not available..."
Hi, after a voltage drop, I found the 7665 with this error:"The machine is not available. Network Controller not available..."
I mention... -
MXPower Surge Protectors
Has anyone tried the new MX Power Surge Protectors by Memory Experts? Rep was just here the other day and left one for me to show the owner. Look to... -
paper output
paper output at the end of half inch to 3/4inch there is an wave form (not flat) why ?
80lb texst coated
100lb test coated set at heavy... -
error code 91
i have RICOH MFP MPC3002 when i print form oracle e-business software
can"t printing has error code form printer function "error 91"... -
Fiery IC 305
Good afternoon to every body
dear i m facing problem with Fiery ic305 when i put CD for programming it shows NO PLATE FORM if any body have salutation... -
Sales Request Form
I am not looking to re invent the wheel here, just hoping that someone has a sales request form that they are willing to share..
... -
KM-4035 tray 1 message "paper drawer out of order"
swapped lift motors and both motors are good. I switched connector form tray 1 lift motor to tray 2 lift motor and tray 2 still worked. Swapped trays... -
colorpass z500e not starting up
Hello. I have a colorpass z500e not starting up. freezes at halb bar. i thnik if i reinstall the system software on it i can bring it to life. can you... -
control panel goes white screen
hi guys,
anyone had experienced the control panel for the press c8000 going white screen. Upon boot-up, konica logo only then screen will...
