123 results in 0.0462 seconds.
-
Sharp MX-LC12 MX-7081 with Fiery
I recently installed an MX-LC12 to an MX-7081 with a Fiery and performed a firmware upgrade. The customer was printing restaurant menus on heavy 2 paper... -
iR4545
Picked up some of these from wholesaler. I have one that isn't playing nice. I noticed residue on the film that was showing up as trash on the copy. ... -
Opinion on minolta C450I
Greetings everyone i have a client in a copyshop he has a C452 and its time to change the machine (only has 1.100.000 copies) so i am thinking to suggest... -
CS-3550ci Jam 4219
I have a CS-3550ci that is having a strange issue. They called in for 4219 jams when printing envelopes/labels from the MP Tray. While at the call the... -
IR Adv C3320 thick paper issue.
hi,
i have IR Adv C3320 copy & print issue on thick papers(170gsm -256gsm).
the copy & printing on 80gsm copier paper is very good,... -
C5051 Copy Calibration needed
I have a box that seems to require frequent copy full adjusts. How often are you needing to do this on moderate to heavy color use boxs? -
What life are you seeing on mpc3003 and mpc4503 fuser units,fuser sleeves?
hi.
As low meter lease returns become harder to get i am faced with higher count units.
I have a bunch of the 03s out there but none with... -
Jam 011A in POD Deck Lite C1 ( iPC 650 )
Good evening everyone !
I have several POD Deck Lite C1 jammings with J011A code with the most varied types of media (plain, coated, heavy, etc... -
Poor Color Prints on heavy paper
IRADV C5030 Seems to be only on heavy paper. The samples shown are blue but it does the same with any color or black.
I am thinking IT belt,... -
MX2615N Noises
Hey all, just wanted to let you all what I've found. I've had a customer call twice about loud noises when running envelopes and cover stock through the... -
Canon Irc-4080 ligth copies from bypass, heavy2
Hello all,
Hope someone can help me out with this.
I have 2 canon IRC-4080 and both giving this same issue: When printing from... -
paper output
paper output at the end of half inch to 3/4inch there is an wave form (not flat) why ?
80lb texst coated
100lb test coated set at heavy... -
Phaser 7760 Cyan atc sensor failure meesage
Customer first got message to change cyan imaging unit. Changed imaging unit and it worked for little while then pretty heavy concentration of cyan on... -
mx3501n not fusing 28lb paper
Trays are rated to 28lb, Would rather not use heavy setting through bypass tray.
swapped fuser out of another machine - same result.
... -
MX3500N-4501n all with heavy saturation using Publisher
So tried various color and half tone calibrations. On other files such as Word Doc or printing from pages on internet - appear OK....
