17 results in 0.0127 seconds.
-
Error 315-500 accompanied by an error 743 on IRa6255
Boots normally no error whatsoever then copy a 1 page docu it works on the platten glass and makes a print immediately without flaw. 1 copy spits the... -
Xerox Versant 80 180 2100 3100 tag 13
anybody know the part number for the bracket that holds the fly wheel ?
also the gear that goes on the 1st BTR and goes into the fly wheel
... -
Suction cup effect with DF
Hi, it happens to me in some new printer installations to have the sucker effect on the ADF. When you open it, it is as if there is some glue that holds... -
biz 350
Does anybody know ifi remove the arm that holds duplex can cause problems to copier -
Part # needed
Hey guys i need the Part #s for the cables that drive the paper lift plate on the Canon Paper Deck X1 its the large deck that holds 11X17 on the IR... -
HP 4350
Have an HP 4350 with a broken clip that holds the transfer roller clip on the right side of machine as you are looking at the machine from the front.... -
Toshiba eStudio 170f
Worked well until a few months ago. When I turn it on it displays "Toner not recognized", I understand that is a problem related to the thingy... -
CS 552ci Jams from Large Capacity Tray (PF-760)
I have a customer with a PF-760 and she says it jams when paper gets low. I cannot get copier to jam. I replaced rollers and clutches in the...
-
Lanier ld075 ( richo aficio 1075)
Working on lanier ld075 ( richo sficio 1075) need to remove the fuser to take it to the shop. What am i missing here? Right side i see to release with... -
SCX 6320 broken shaft
I have a broken plastic "shaft" that holds one of the delivery drive gears. It appears to be molded to an assembly of some sort. Anyone familiar... -
Muratec F160 original tray
I need the tray for an F160 that holds the original before it enters the feeder. I have a couple but they are discolored and dont match the machine. I... -
C451_550_650 Range
Has anybody had any of these machines 'dump' dev & toner on the black IU's. Ive had about 4 do it now all on diffrent firmware, ( have updated since)... -
DP-8060 Jamming under drum.
I have a DP8060 that is catching the drum pawl on the front side of the machine. I have replaced the HV PCB, separation transfer corona unit, drum unit,... -
EZ-RZ press roller
I ama having touble with an EZ- 220 intermitantly jaming and the press roller is staying up to the drum holding the drum in the machine. I have cleaned... -
Bizhub C350 Colour Problem
Hi!
I have Bizhub C350 in my office and there is a colour problem for the last few days.
At the attachment there is the test...
