104 results in 0.0313 seconds.
-
Canon Imagepass s1
We just worked on a customers Canon IR7095 for a E000840-001 problem. We had the faulty DC Controller repaired from Hytec and the machine is now copying.... -
IR7200 replace laser assembly
I want to replace laser assembly on IR7200.
In SM, it said to adjust the LA-DELAY after replacement.
Where can I found this LA-DELAY... -
Is Hytec really any good?
Had a customer send a ccd board in for a Minolta DI450. Came back as NPF. Cost $118.0
OK, then I must have a bad B board. Sent to Hytec... -
Ir 6020i background
This machine has about 670K on the meter and has been installed for about a year. When I first got it, it was throwing
E0061 codes. The wholesaler... -
canon 8070 saddle finisher has jam error code 1091
the finisher will make 8.5x 11 books but not 5.5x8.5 -
IR5570 dc controller
i have 3 ir5570 dc controller with the same error E824, how can i fix the dc.
thanks for help. -
Aficio SP C410DN - SC365
SC365 TD Output Minimum Error: Magenta, Vt[M] is .02.
Changed the drum unit, TD sensor init - no change.
Checked the wiring and it is continuous;... -
RAM for Canon iR3300
Hello, I need RAM to replace the original 128mB bar the printer was delivered with originally. Our service technician from Canon tells us the model is -
Error code J32-02 on Konica 7155
I keep getting this J32-02 on my konica 7155 and the paper stops right under the drum and will not go through the fusing unit, and it will not stop doing... -
E studio 232 error F10
Hi,
Toshiba e232 has error F10 what I know is HDD is failure.. what shall I do with the new HDD? Do I have to upload new firmware? if yes how to... -
Canon iR5055 will not print, posted by masterofpatience
masterofpatience Canon iR5055 will not printSo, I have this iR5055 that needed to have the main control board replaced due to a bad RJ-45 connector... -
Canon iR5055 will not print
So, I have this iR5055 that needed to have the main control board replaced due to a bad RJ-45 connector got the board replaced with all the old components... -
ricoh 2027 still waiting
Ricoh 2027 display says please wait. after 20 min still says please wait. not going to ready state. -
3570 had e540-8005 and then e540-8001 I think its alright now
Had the 540-8005 and that was gone with a new harness. Single tray was running up to the top. Never blew a fuse. Replaced the harness and a couple days... -
C6501 BSOD
Here is a strange one. The customer reports that a few times, in the middle of a run, the machine stops, doesnt jam or display a code and the lcd screen...
