We have a SPC821 with FU1 always blowing.
We cannot get out of this.
Fuser looks good.
Manual talks about IH Coil, but we've...
24 results in 0.0138 seconds.
-
SPC821DN - FU1 Fuse Blowing
-
IH coil for ir5055
hi guys can any body help me know what is the part # for the IHcoil of canon ir5055 110v.
thanks -
3b02 code on Konica C652
I am having this code happen 4 to 5 times a day. i have replace the IH coil, fuser, IH power supply, and REDB. still the code continues to appear coming... -
MPC 2500 with 553
I have an MPC 2500 that is popping a 553 in the morning not every day, but a lot. It runs the rest of the day, but I also noticed that the code doesn't... -
SC 582 Aficio MPC5000
Hi The service handbook says to replace the IH init relating to the above error code,
I think it may only be the thermoswitch built into the IH... -
C552 blows building circuit breaker
I have a customer whose C552 is blowing the circuit breaker immediately on power-up. The sub-power switch doesn't need to be turned on, just hit the... -
MPC4000/5000
I am facing problems in MPC4000/5000 trips and 230v fuse blows of.we repalced coil and inverter together,the machine is working but,I want to know if... -
Sc 547 savin c2828
Had a tech go out to trouble shoot an add toner issue (usually toner rock in supply hose) after he cleaned out the supply area and reassembled the machine... -
Ricoh MPC3500 error SC580
The error is a zero cross error or the IH inverter. swapped IH inverter and fuser,no help.any ideas? I may need to dust off the old multimeter for this... -
MPC3500 SC 551
Hi,
I have many time SC 551 depend, my be once per month. I changed both termistors and upgrade Firmware and checked conectors. After this interventions... -
Toshiba estudio 550 shuts off
Copier shuts off only a few seconds after you turn the power on. -
SC 553 on a RC4500
Hey guys,
We are getting a SC 553 on a C4500. We have swapped fusers and tried a new IOB. The service manual points at the BCU or the PSU.... -
C440
I have an es 453 with a c440 csl. The thermistors have been replaced twice and the copier ran about a week each time. Suggestions? -
e-Studio 35 C47 code
Found code for 08 400 reset that has a "10" in it everytime I check it. Reset to "0" and it comes back instantly after turning machine... -
SC 582
i have a LD 550c that has an SC 582 ihave all the voltages and replaced the fuser relay board can anyone have any ideas
