64 results in 0.0250 seconds.
-
MPC2500 dark top and bottom but light in the middle
Anyone seen this? as in the title an MPC2500 that is intermittantly dark at the top and bottom of the page (as in normal darkness) but goes faint in the... -
MX-4501N intermittantly going offline
hello guys i have a Mx-4501N going to offline mode aftre a couple off prints, if i power down the copier and power up again it works for a short time... -
ADF Jams on MP7000
Hi all,
I have mp 7000 jamming in the ADF.When you put the documents in the df the tray lifts when you hit the start button it dosent feed.And registers... -
Konica Minolta 7300 printing 'wavy'!!!
Hi all
I have a customer with a konica Minolta Magicolor that intermittantly prints 'wavy' - please see attached image.
I... -
Sharp AR287 LSU or polygon motor
I assume I need a new polygon motor for an AR287. It looks like this motor comes mounted on a circuit board within the LSU. The LSU from an AR405 parts... -
C550 Jamming tray 4 only
Hi all, Ive got a c550 that intermittantly jams from tray 4. The lead edge of paper just exits the feed assembly and doesnt make it to the next set of... -
taskalpha fax kit error code U01095
Anybody know what the code means ?
Got this customer that intermittantly has fax problems. They insist it is the machine but when I am there it... -
M118 intermittant E1-1000
Hi i have an M118 machine that intermittantly jams as it passes through the fuser and just about exits the exit assembly.
Have changed Reg clutch... -
IR3100CN Jamming
Hi has anyone had this jam problem before, paper intermittantly will jam pre registration, the jam code displayed is 0B01 door open jam? This might not... -
SC483 error
I Have an ongoing problem on an mpc7500 with a sc483 error. it intermittantly shows this code, which is the yellow cleaning motor error. i have swapped... -
Bizhub 420 paper size????
I have a BH 420 that I have now brought back to the shop. It keeps showing question marks where the paper size should be displayed. If you select that... -
KM1650 - Error in connection
I have a KM1650 in the field. Problem i sthat when they scan to email, it intermittantly says error in connection.Gateway, DNS, Subnet is all fine.Address... -
KM5050...JAM17
Any input on this one guys? KM5050 with LCF (PF-750) runs fine from left side. When left side is empty, right side tries to feed but jams ( JAM 17 )... -
NP6035 EO65 code
I know this machine is ancient but, is still have a few out in the field. I have had this problem before and replaced the sep/trans unit(sometimes fixes... -
Ricoh MP C6000 error SC-687 and SC-990
Hi all
I have a machine which pauses during printing/copying and then pops up SC code SC-687.
Switching off and on clears...
