31 results in 0.0144 seconds.
-
C1060 with C-3501 error code
Can't seem to find the problem of the C-3501 code. When doing the code reset it comes back. I have replaced TH1 sensor to no avail. Replaced TH2 sensor... -
Ricoh Pro 8110 Please wait, not printing
Hi,
I have this pro 8110, after changing developer printed 100 pages then turned off machine to put back plastic parts.
After power... -
C1060 warming up after fuser rebuild.
Good day everyone , I have a c1060 that says wait warming up forever, the progress bar gets all the way to the last Bar and stay there, all lamps test -
sharp lamps
I have 2 slightly used heater lamps for Sharp Mxm654N 200V part number RLMPU0863FCP1. Lamps where installed before noticing they where the 200V part... -
WC7775 very strange failure tray 5
hello, in a XEROX WC7775, bypass tray 5 doesnt feed the sheet, only 375-135 error in fault history, inside tray 5 the motor gears are ok, also fuser lamps... -
Ricoh Aficio 1035 SC542 Error code
I have a Ricoh 1035 with a brocken fuser heater lamp.
I see on China Market 250w 400w and 640w lamps.
How can i determine witch Power i need... -
Xerox C70 keeps melting fusing lamps causing 010-334 codes
I have a Xerox C70 that will melt the fusing lamps causing 101-334 codes. I can replace the fuser and it last a month....maybe. -
fujitsu scanner fi-6130 constant P in display
Changed feed tires and drive tires, after reinstalling these parts the machine starts to cycle but stops on P. It should go 8 then P then 0 then 1. Also... -
Loire (e Studio 455): C440 Sub-Code 9
I know this is an older machine. The reason I'm putting this up is that BOTH RIBON and the Service Manual incorrectly identify the heat lamps in the fuser.... -
SC 552 AFICIO MP 5500
aficio mp 5500 keeps throwing sc 552 on startup. when i cheat the doors i realise the lamps do not come on.
i have changed the three lamps and... -
Bizhub 920 SC36-05 SC36-03
These are the times I kick myself for keeping these old machines in service.....
Super Clean with 3.29 million. Has the recyclable unit and... -
biz hub 750: new fuser rollers.... not quite fusing! lamps okay
Both upper and lower fusing rollers replaced. The image is not quite fusing (will rub off with effort). Previous rollers fused the image okay but worn... -
Aficio 3260c SC530
HI,
I can`t find in manual what SC 530 means so, I replace the whole set of termofuses and termistors and still after few seconds showing SC 530.... -
MX-4501N blowing fuse when fusing unit is connected.
F1 fuse on the ac board keeps blowing on me Ive tried a new loom which isnt the problem and borrowed another fusing unit which kept displaying heating... -
BH 750 firmware
Hey all. Got a 750 that's not warming up nor coding out even after 5 min. all is active on op. panel. Heat lamps not turning on at all. Thanks. I got...
