Hi,
I've been working on this one a few weeks, C364e with a finisher, and over 1 million copies on the meter. There was developer leaking in...
388 results in 0.0513 seconds.
-
C364e 99-01 jams, stuck like a tongue to a flagpole
-
Dark band on c6500 42mm~43mm lead edge.
I have a interesting problem that seems that has shown up as of late. I have customer when printing 256-300 gsm stock with a half tone the first 42 to... -
C550 - black smudges about 1cm away from the lead edge onloy on A4
Hi ..have c550 with this rather strange issue
the lead egde is covered with smudges roughly 1 cm away from the edge and it appears only on... -
Lead edge / trail edge
Have an interesting problem. Large LCT of c6500 (trays 4 and 5) seem to be acting up. I have a lead edge trail edge issue with thick stock only. Also... -
CLC-1120
i need to adjust image center its' shifted to the right about 6mm. then i'll need to adjust lead edge void it's set to about 8mm. what mode is it on... -
Toshiba e studio 351c paper jamming error code E320
...Im having a copier misfeed error E320 when copies are been made using paper tray 3 (LCF)
as precautions i cleaned the entire feed roller assy, roller's -
HP 8150 Print qualty problems only when duplexing
Hello I am work on a HP 8150 that puts toner on the edge of the paper only when it is duplexing I have attached samples I need to know if it can be the... -
Scanner IS450 jamming
Once a while original had 1 portion of lead edge pinched and jammed at ADF glass. I checked for burr at white plate, all smooth. The pinched toward lead... -
Duplex Color Image Reader Unit- A1/B1/C1
Measure Against Damage to the Lead Edge Corners of Originals
Technical Publication describes how to minimize damage to the corners at the original... -
Strange paper feeding issue
I have this MX-M 620 with a bit of a strange one, when feeding paper through it, in the 8.5x11r direction, it will dog-ear the lead edge corner of the... -
How do I fix a j32-02 on a Konica 7155
(I just replaced the ADU board and it is working now.)
Hello,
I have a Konica 7155 and it is giving the J32-02 error code.... -
Canon 330 Jamming (Z-folding )
I have a unit that is Z-folding before the Reg. roller. -
C550 Jamming tray 4 only
Hi all, Ive got a c550 that intermittantly jams from tray 4. The lead edge of paper just exits the feed assembly and doesnt make it to the next set of... -
Unexplained lines on scans
Hi
I hope someone can give me a solution: I have a FS-3140 (About 1 year old) and a FS-1128 (Installed today out of the box). When scanning... -
UTAX CD1080/KM 8030 blank image
Hi Guys
can anyone shed some light on a problem that I have with a Utax CD 1080. after sliding out the drum assy and removing the charge...
