14 results in 0.0173 seconds.
-
Bizhub C550 right door open limit switch faulty
There are two switches. A microswitch on a spring pivot further up. Then there's a switch with a push pin. The push pin switch is fried. It is a heavy... -
SR790 Finisher for Savin 8055
So I've got an SR790 Finisher that the customer has abused to the point that the Paper Height Sensor Actuator was popped off. Reattached, but still as... -
fn 117
we have a bh-2510f w/fn-117 that gives a c0b0a just about every morning when the customer comes in and turns the machine on. we have swapped the finisher... -
C6501 FS521 Tray doesn't stop.
Hi guy's,
I've several C6501 with FS521 (stapler), the engine is in version 60.
The problem is that sometimes the main tray... -
Canon NP6545 sorter error code E540
Customer had gotten this system 2 weeks ago and it was working okay then getting E524 during warmup cycle. I notice that the sorter was not alligned properly... -
Bizhub 250 c0202
I managed to clear the code after the customer got paper stuck behind the drawer. But when I opened and closed the first drawer I can hear it keep trying... -
Di-3510 with FN-117, C0BA0
Di-3510 with FN-117, C0BA0
Machine comes to ready, finisher initializes normal. Copying is possible however as soon as the lower finisher... -
Riso GR3750 Help Needed - Repost
Since the threads were lost I am reposting this, I got a email saying there was a reply, but I was unable to read it, so basically any information would... -
Minolta Ep1085 S106 finisher
I have a code from the inisher on a Minolta Ep 1085 I get a code C06-60 which I figure is a finisher code (can't find it in the manual I have) what is... -
DC 480ST, Pro90, DC470
Hi,
first off all...GREAT Forum
So i have a 480ST, a 470, and a WC Pro90 all have Errors :/
at the first i want to... -
sharp SF-2027 woes
I have a Sharp SF-2027 that has me stumped. I get F1 display and cannot seem to find out what is causing it. Can anyone give me some insight. Thanks ... -
Konica 7050 E46-8
Hello there! I would like to know where the INDEX SENSORSB Located in the machine? konica 7033 Error code E46-8 -
Bizhub 500 with error code
I have a bizhub 500 with an error code of C1102, does anyone know what this is?
Thanks -
Kyocera Mita 4530 - 3000 paper drawer
I have had multiple calls for this drawer being disabled. Go thru the simulation 906 to reset the drawer to be useable. Has anyone experienced any problems...
