101 results in 0.0358 seconds.
-
1515 leaves dev on copy
Hi everyone....I have a 1515 that the cust has put about 15,000 copys on the PCU before they complained about gritty copies. I replaced the PCU yesterday... -
Riso RP-3100UI Pressure Roller not lowering far enough to get drum back in
Hi All,
I have a RP-3100UI machine that has worked decently for the several years I have had it. A few days ago when I had a jam and pulled out -
-
Sharp MX-6201 poor yellow
Hi!
I am working on a MX6201 with a Fiery Rip. When I print 64-1 with only yellow the colour is uneven. The fault is best seen when printing... -
J81 jams on Harrier (CS-6030/CS-8080)
I discovered this one only through blind stubbornness. I have a feeling it's probably pretty common.
When the paper leaves the fuser it is... -
paper deck A1
had to restring the cables to a paper deck-seemed to go well untill power up. The copier recognizes the prescence of the deck, however the is no action... -
mx2700 halftone calibration
Hi to all
I seem to heave problem with calibration of mx2700. I heave ether made mistake in calibration procedure or I'm missing something... -
Konica Minolta Bizhub C350
Hello Every One ,
I am facing a problem with c 350 when i print from computer some pictures its printing very slow taking long time i try... -
New Discounts on Printing Stickers Announced
(PR-inside.com) February 11, 2011- PrintingBlue has announced a significant decrease in the prices of stickers (http://www.printingblue.com.au/sticke... -
No joy with Kyocera FS-C2126MFP fax
Got a FS-C2126MFP last week. Everything works great except for faxing, which is a no-go on send OR receive. Sending symptoms are pretty similar to those... -
arm 355
Jamming out of the upper letter tray. Watching it while feeding out of the tray the tray lowers goes up then lowers again then jams. Is the lift motor... -
Problem with finisher on estudio 230
Hi folks,
I've got a secondhand toshiba estudio 230.
The finisher attached to the machine seems unable to scroll up and... -
iR4570 - fixing film jam
my canon ir4570 got film jammed. it start jammed when i replace a new fixing film. I've put some grease and it goes well but only for a few days, after... -
Trouble Code "H4-04" on Sharp DX-C311
I have been out to this machine on a number of times and the Trouble Code is fairly easy to clear (either via sim14, or sometimes it will just clear itself... -
MX-2700N slow to print, ping
I'm looking at an mx-2700n which intermitently won't print. Displays ripping on the spooler screen sometimes, also sometimes takes a long time to print....
