Hey Guys,
I have a problem with the wax lubrication bar getting clogged with toner and getting gunk on the drum. The drum is in good shape...
39 results in 0.0254 seconds.
-
Lubrication bar in cleaner unit. c3002
Last edited by homer; 01-10-2023, 07:09 PM. -
Lubrication for swing plate gears/fuser bushings, hp 4250
Wanted to know what is a good lubrication or grease for things like the swing plate gears and fuser bushings for HP 4250 series. I'm using UNIFLOR 8172... -
AR-153e
We have an AR-153E machine that started making copies with this little pattern on them. When I showed up there was an L-1 code being displayed so I ran... -
Starnge noise
I have a MX 3501 making a strange noise from the fuser area, not the unit, but the fuser drive, it has the newer motor, when run in sim. there is no noise,... -
Heat rollers are always better than filim units..............
Hai friends ,
What is your openion about the topic?................... are you agree.............
please share your experiences... -
canon IR 2200 Series noise
I have 2 Canon 2200 series copiers doing exactly the same thing and nobody in my branch has heard of this noise. It doesn't happen all the time only... -
Canon Ir3300 Error E000-E007
Hi all,
I am new to photocopy business. I live in indonesia and have one ir3300. in the last few week my canon copier had repeatly problem,... -
MX-2300 paper jam
Machine has almost 100k and 1 year. For few day's customer complain's about paper jam from bouth tray's of the machine i went there and clean reoller's... -
Having trouble w/ Sharp AR-337 RADF - timing issue?
It jams in the feed section about 1 in every 40-60 pages. All the feed rubber is new. 170k sheets registered in the ADF counter (since new).
... -
Canon pc7 extra copies
Hi,
Got this PC7 i am working on. I know it is old but giving it to a friend that services my van. It makes the 1st copy ok and stops. If you make... -
AR-160/AR-275 lower fuser bearing grease
Any suggestions on the proper grease for the lower fuser bearings on these models?I know these bearings have been around forever but lately it seems... -
MPC2050 - Internal Finisher issues
Hello there, guys and girls.
I've got a couple of MPC2050s, bot with internal finishers. They randomly - but constantly - either throw out... -
c-1 and fuser issues
i seem to have a lot of problems with this fuser, mainly related to belt assy.
i seem to either not have enought fuser oil on the pressure plate... -
IR2200 adf problems
Ok, I am going to be honest, I don't know a whole lot about the adf's on the canon copiers and I have a major issue with an Image Runner. At one point... -
Designjet carriage bushings
Hi
Ive been looking for bushings for the Carriage Assembly for most designjet models. I have a few carriages that are perfect for replaceing the...
