13 results in 0.0123 seconds.
-
MP C305SPF with problems (unsurprisingly) mostly white voids/stripes
Hello, I'll preface this post by saying that I'm not a copy machine tech. So I recently acquired a lower count c305, when I got it, most of the toners... -
TASKalfa 2552ci sloped yellow banding
2 new developers and drums installed. Uneven developer on mag roller on both new developers. No codes or any other CQ issues. Any help appreciated. -
MX-2630 Stained Mag Roller
The mag roller will stain and you actually have to sand it off to get rid of it. It has 48,000 copies on it and this is the second time I've had to sand... -
Bizhub c220 replaced drums with new units, magenta warning still on
Good day. I am now the owner of my bizhub 220. It works well for me. I just replaces the 4 drums with new units. Restarted the machine and the magenta... -
Bizhub pro c6501 error c-2414 and missing dev on mag roller
Customer had a C-2414 and ordered a new bk dev unit and dev material. I came out, replaced, auto charged the developer into new unit, but after a few... -
Canon C3530 Black/Grey band. SOLVED! Special Bulletin Report.
Hi guy's and newbie techs. It turned out to be a 3 inch long high spot on the mag roller. There was some sort of grease, oil, or unknown contaminate... -
MPC4504 PCDU No Developer
I have received 2 "new" PCDU's that appears not to have any developer in them. Has anyone had the same issue with a new unit? I removed the... -
C951 C2210, & Developer pouring out of the dev unit from Mag roller.
HELP!
Just serviced a 951 new drum, dev, wires etc.
Setup fine. After 1200 pages dev was leaking from mag roller, build... -
Kyocera Taskalpha 4500 Developer Housing fix
Is there any developer material in the developer housing of these machines. I have several that are bad and want to fix them (Light copies) Wondering... -
mpc8002 doc feeder issue
I have a doc feeder on a MPC8002 that will pull multiple pages only when its loaded with 2-3-4 sheets, if i load it up with 60-70-80 it runs just fine..??... -
MX-4111N Loosing Developer
Hi Guys,
I have a 4111 that I picked up from another company. I went out to it about 1,600 copies ago and changed the developer. The copies... -
e Studio 306 White Void
I have a white void that is produced by the developer unit. Swapped it out with another and problem is gone. The blade gap is correct and there is new... -
Ricoh SP 5210 Toner Cartridge rebuild
I have rebuilt several cartridges and replace drum/toner/ blade/ chip. I have a few that have failed. Where rt side of copy has lines and is light and...
