49 results in 0.0213 seconds.
-
Riso RZ370EP Master Making Problems
Hello...
Need your suggestions and ideas. I m working on a Riso RZ 370 EP, it nicely starts master making process, pushes master through... -
Ricoh MPC3004, weird noise color print not good
Hi,
Customer called for bad imaged color prints. (see picture)
Checked the Dv units, Cyan and Magenta, seems allright.
When... -
Bizhub 808 making noise when feeding from bottom cassettes
These 808's have been mostly solid from my past experience, but I have one on the field that is making a pretty audible noise from the bottom two cassettes... -
MP2852 light copies
Hi,
i have one mp2852 that i have done full PM and machine was working ok but after making some copies they are coming out lights. I already... -
Rebuilding a C-658 Fuser...
Several months ago, I ordered (what I thought) were the correct parts to rebuild this fuser, the sleeve, lower roller and cleaning rollers and bushings.... -
Update For My Firmware list.
I have managed to Recover the Whole Samsung Archive of 259 files.
i will be making a list soon of the available firmware for trade. ... -
iR-ADV C5250 making weird noise. Going or soon gone?
Hello everybody,
My Canon C5250 has been making a weird noise the last couple of weeks.
I made a small clip of it here because... -
automatic printing from a scanned folder
Hello,
Just making sure not making a mess this time. (thanks to those who DM'ed me)
Client requires a configuration where all... -
HP M477 Blank or no black on copies
I have a M477 that after replacing the fuser for damaged fusing film, when we print the demo page it comes out with no black. Also as the printer printed,... -
Taskalfa 3500i
At the bottom of the copypage about 5 cm the toner seems to spit. I can feel it with the tips of my fingers. I run drum refress1 and 2 , developer agittating... -
sharp mx-4070N folds paper when making a 2 sided copy
We have a Sharp MX-4070N that works fine when making a single sided copy. When making a 2 sided copy the paper has a fold before kicking out to the output... -
Xeorx Work Centre 7530
The only thing that comes up on screen:
The machine is not available.
Reset the machine
Customer said machine was making noise... -
Lexmark MX511dhe powers off by itself
Hi everyone,
I have a Lexmark MX511dhe on my bench, that after powering on, it will go through start up motions normally. After... -
C258 noise when scanning
Hi,
When i scan i can hear a strange noise coming from the machine. It happens when the lamp is moving around the center. It is difficult...
