76 results in 0.0289 seconds.
-
Color registration marks on ir 5250
Help, I'm getting actual color registration marks on the printed area of the page, there are colored areas that shouldn't be as well, i started setting... -
MP C8003 Wrinkling fuser belts
I have a C8003 that keeps getting wrinkles in the fuser belt, causes diagonal marks on the copies. Problem comes back quickly after rebuilding the fuser.... -
Print quality issue Konica Minolta C308
I have a Konica Minolta C308 I bought used. It seems to work fine other then there are black marks/stripes on the output. The black marks are on all test... -
Dash Marks cs 5053
Hello all , having a issue with this copier . It keeps leaving dash marks, the front of the marks are bold and then leaves a tail on random prints and... -
Heavy scratch marks on paper
Good Morning to all of you,
Please, i need help with a konica c554e causing scratch repeated marks on paper. The marks looks like tire marks... -
DK-5195 Marks
Has anyone figured out a way to keep the DK-5195's from leaving marks on the rear frame side ? It almost seems as if the drum pulls away from the blade... -
Marks on halftone prints - issue when gradating on c224e
Got a c224e thats printing fine, but has an issue when gradating
These halftone images attached are set to a density of 50, any suggestions/ideas... -
Calibration marks on prints TA5052ci (Utax 5006ci)
Hi All,
Bit of a strange one, We have a machine where the calibration marks are showing on the print outs.
so far we have changed... -
Sharp MX C301 issues help
Hello everybody,
a few days ago I bought a used Sharp MX C301. Meter by this machine is only 15k. The machnie is 5 years old. The first... -
samsung clp-620nd charge streaks
The first few copies are ok, but after that it looks like the charge is causing streaks. The more copies that are run the marks go from lead to trail... -
Calibration marks issue 508ci
On a 508ci
I get these calibration marks on the page for the first few pages than it cleans off, than returns.
I have replaced the transfer... -
C5235 need cleaning
My C5235 needs cleaning, and I will do a thorough cleaning when i get the time. Before that happens, is there an easy way to get rid of these marks?... -
Middle marks in MPC2050
I've got an issue with the printer printing wheel-like marks. I attached a photo so you can see better.... -
CS-5031CI yellow bandin
Hi Folks,
A new customer that has this CS-5031, with almost a million copies, but getting yellow banding, crossfeed direction. only yellow, looked... -
Konica C1060L/C2060 Drum Failures (A5WH, A5WJ)
I work for a dealer. Just wondering if everyone else is having the same issues as we are. We're only getting like 30%-60% life out of most drum units...
