Hi.
New guy here. Our small community has a Ricoh MP 4002.
Since we've had it, we manually select tray 1 whenever we are...
Search Result
Collapse
51 results in 0.0238 seconds.
Keywords
Members
Tags
-
-
Paper Misfeed Remove paper from C.
I have a Ricoh Standard SD360 Digital Duplicator and I have the Service Manual to it. I'll get paper Misfeed Remove paper from C. According to the service... -
Konica Minolta C284e Misfeed detected. 32-01
Hi
Konica Minolta C284e getting Misfeed detected. 32-01.
Paper just folds before fuser rollers in the fuser. Doesn't exit from... -
sharp mx-365n phantom ADF misfeed
We've got a sharp mx-365n that reports a misfeed in the document feeder that can't be cleared. It instructs us to lift the lid and check the panel underneath... -
Konica Minolta C654 Misfeed 72-21
Konica Minolta C654 getting Misfeed 72-21. When paper (A4 SEF) exit from the finisher tray 2. From left side doesn't come out smoothly so start getting... -
RP3700 Multiple Misfeed & Jamming
Still having misfeed issues with our RP3700...
Sometimes it will print 20-30 copies in one go with no problem, other times it can't even... -
Another C452 issue
Original issue was it would feed one copy all the way out but show a misfeed found exit actuator tip broken off , after replacing that I now have a constant... -
M950 misfeeds from all trays
All trays misfeed, I get C3PFD_S4, PPD3_N4, Tray 2, C1PPD1_N, MFT, depending on the tray. I found a cracked torque limiter in tray 2, same result after -
Code SC547 [aficio MP 2401]
i got this error after the paper exit paper misplaced because the usr didn't know how to pull the paper out after a misfeed
thank you for... -
C6000L with LU202 jams J1501
We have a C6000L with a LU202 on it, it's done just over 1mil. We keep getting a 1501 jam from the LU, most of the time it seems to not pickup the paper.... -
C35 Misfeed, Jams on duplex
Hi,
Still trying to fix a C35 that jams on duplex right when the paper reverses to get pulled back into the machine. Here is the story starting... -
Riso GR3770 clamp error/master mis-feed
Hi,
A friend's riso keeps giving a clamp error message and the few times you can actually reset it to make a new master, the master roll...