Hi guys!
Just solved this one.
If you get J102 on SR5000 when you are NOT punching, check if the mylars inside the Punch Unit...
17 results in 0.0099 seconds.
-
[SOLVED] Pro 1107 + SR5000 with J102
-
Task Alpha 300ci
I have a 300ci that is jamming at the transfer belt I read on this site that there is an update with new Mylars. I need a part number for the kit also... -
TA 300CI MYLAR UPDATE
I have a 300ci that is jamming at the transfer belt I read on this site that there is an update with new Mylars. I need a part number for the kit also... -
1107ex Duplex Folding and Jams (Aaaaarrgh!)
Does anyone have any experience on this?, we have a 2 year old 1107ex (Done 5m) that we've looked after from new. Whenever the customer is doing A3 duplex... -
FS-529 issue
Had issue every few pages where the exit rollers when pulling the paper back into to do the alignment, some pages would go back in skewed and cause a... -
Ricoh 1060 jamming
Hi guys,
Ricoh 1060 giving jam codes 101 and 66, i am replacing the mylars in the transport section as i have had issues with paper feed... -
Taskalfa 820/620 feed mylars B & C
Does anybody have the part numbers please, my manual sys the same part number as for KM6030 but they're a different shape! Cheers -
Ricoh 1075 noise
I noticed a noise in this copier that appeared to be coming from the develpoing unit. I replaced the unit and noise went away. upon inspecting the noisy... -
sr4000 not stapling
i have a sr4000 on a mp7500 that wont always corner staple what i mean by wont staple is it staples but misses the paper for some reason this is very... -
ar275 and changing 500 sheet upper tray pkp/feed --a little help please
Not feeding from upper 500 sheet tray on AR-275. I am finding it hard to understand service manual. It tells you to remove dv and drum units which would... -
C450 DF-601 dog-eared originals when duplexing
Can anyone who had this problem before shed me some light on this one?
I've already dismantled the entire right-side of the DF (exit section)... -
e-studio 450 w/mj-1023 finisher folding copies @ the exit
I have an e-studio 450 and intermittently as the paper exits into the upper tray it folds the corner on the front frame side. I have been a tech for... -
ir advanced fin a1
When doing multi prints/no staple-grippers seem to pull top sheetn back into delivery area. Canon has a mod-firmware and possible part replacement. Part... -
SR 790 Jamming Problem (Staple)
I have been encountering many jam problems with the SR790 Finisher - particularly when sort/staple is selected. I find that pages curl over as they... -
Riso gr3770 Master Misfeed
I load master, close master loading unit. It feeds then stops with mess. "Master Misfeed Remove master roll then re-install". Just keeps repeating...
