12 results in 0.0175 seconds.
-
Lexmark XM3350
New out of box Lexmark XM3350 is DOA. Any simple fixes? Maybe a fuse on the PS? Unfamiliar with this model. Most of my Lexmark experience is on the... -
BP-70C45 No power after removing jam
Hey guys asking this question due to tech support was not much help.
New out of box BP-70C45 at end user site less than 2 weeks and has a... -
Brother MFC-L8850 Will not power up
My client has a Brother MFC-L8850 that will not power up.
After desoldering and checking the two fuses on the power supply, I went creative. -
Konica Minolta Bizhub C352 no Power (not working)
Hi Everyone my Konica Minolta Bizhub C352 is not turning on and does not show any display but the main power light is green and start button light is -
Konica 458E wont turn on
I checked the AC voltage in at the DC power supply it is good, no voltage coming out of the DC power supply. Replaced the DC power supply still wont turn... -
Toshiba e-Studio 347cs won't power on.
I have a Toshiba e-Studio 347cs that won't power on at all. It just died all of a sudden after working fine. I'm new to copier repair but a seasoned... -
Ricoh Pro 907ex Problem after short
Hello I have two of these Ricoh Pro907ex machines and one of them had a bad jam between the Duplex Tray and Registration Area.
When pulling... -
HELP ADF Doesn't work/ bizhub 250
Good morning,
I am in dire need of help. I have a Minolta Bizhub 250 (not C250) which has a DF-605 ADF.
I transported the machine... -
Canon IR C3220
I was at a new customers office working on a different machine and they asked me about aCanon IR C3220 that they have that has no power at all. I have... -
HP 9050 TRAY 4 NO POWER
I have an old hp 9050 that is giving me no signs of power. It is undetected by the machine. I checked the manual and I am not sure how to proceed. ... -
Lexmark X3350
Hi Guys
I have a Lexmark X3350 that isn't coming on. I have cleaned the contacts on the power plug and the machine. Please help.
... -
Bizhub C452 completely dead
Howzit guys
I've got a Bizhub C452 at one of my clients thats completely dead. I've replaced DCPU (power supply) and PRCB (printer control...
