Dear All,
Many thanks for your help with my previous printer issues. Here's another issues I haven't been able to fix. My Kyocera P2040 is leaving...
245 results in 0.0392 seconds.
-
Kyocera P2040 leaving marks midway down the page.
-
Lot of thin streak line_KY 5500i
Do any one saw the streak line occurring in Prints?
I did not replace any parts and perform #140, there are lot of thin streak line occurring on... -
PRO 951 C2810 Error Code
Afternoon fellow techs, We have a KM PRO951 that keeps throwing us a C2810 error code. Service manual states replacement of Drum potential sensor and... -
AR-M257 light/void area...
Working on an AR-M257 that several techs have been out on previously.
The machine has had several PM's within the last couple months (techs... -
bizhub 1051
i have a 1051 that throws j2101 codes
i clean the ground clip and checked the gap for transfer belt and i tried changing transfer voltage nothing... -
jam in fs-2020
Hello everyone
....this a very serious issue and will appreciate if this can be rescued....we just got a contract wit a shipping company...and... -
Canon iRC5185 - Strange Test Prints and Magenta Registration
I went to a customer site to replace a Magenta Drum/Dev unit that was failing, had reached the end of its life and was leaving massive magenta streaks... -
canon ir 5075 error 0202 and 0101
So the service manual says a scanner homing issue...all errors have been cleared..it seems to work but there must be an adjustment ...what could that... -
Black copies ... well sort of.
I think this qualifies as a heads up. I suppose I ought to throw in all the embarrassing details.
The machine is an iR3570.
It started...Last edited by blackcat4866; 04-13-2013, 04:46 AM. -
-
Canon IR7105 Light Image using A4.
Hello!
I am having light image in 1/3 of A4 in the feed direction.
This happens both in one sided and two sided pages,copying and printing.... -
F1-17 mxm850. (Mxfnx5 finisher)
Hi,
live got an mxm850 with an mxfnx5 finisher. I'm getting "f1-17 check power to finisher" displayed when the machine is switched on.... -
AR-m237 customer says quality poor in AM when machine is turned on
Customer says when machine is turned on in morning the copies are smudged and smeared but is okay after a while.Frank/ActionPhotocopy -
canon ir 3225 no display
Hello Every One,
I have two machines canon ir 3225, and one of them is dead. no display ,except mother board i cross checked all pcbs . Should... -
IR2570 CANON STRIPES
Please, I need help.
.
As I can remove these stripes.
Photocopying has 300,000 copies.
Thank you....
