Hello, I went on a MP 402 call yesterday and there are two problems:
1. The ADF is bending the originals in both of the leading edge corners....
316 results in 0.0462 seconds.
-
RIcoh MP 402 ADF bending originals in corners and prints are cut off on the left
-
C450i poor print quality
Hey all, it's my first post
!
Got a KM C450i since new but now i'm getting some troubleCOUNTER: 110k, 70k black 40k color.DR: K: 54% C:... -
i-SENSYS X C1127 error E194-0000
Hi Guy's
I have a problem with i-SENSYS X C1127 because it often gives me an error E194-0000 and always when I do 'Correct Print Color Mismatch... -
Samsung xpress C1860FW
Hi
Order rejected, scanner not available.
With the device you can print without any problems, when scanning it shows the above on the... -
Storage board (SSD) aftermarket i series
Hi everyone!
I'm trying to understand if there is a memory that can be purchased online to replace the original KM ones for the i series models.... -
Interesting stuff
We just installed few KM A3 machines(300i and C250i) 2 of them with dirty glasses on the bottom side, one dot was on slit glass and another on original... -
Epson EcoTank ET-2750 waste reservoir reset
Good morning all.
I've got this machine that stopped asking for a new waste receptacle, which I promptly replaced with an original part.... -
Konica minolta c284 unsolvable problem
Hello,
Please help me!
My konica minolta c284e prints a thick black line with spots, that exceeds the print area (different each time) when...Last edited by Narcis07; 10-12-2023, 01:09 PM. -
Copystar CS5053CI C7404 error
This si a strange one I was hoping someone could point me in the right direction on. Had a machine for lease return that I was pulling good parts from... -
Auto Rotate on Toshiba 5015AC?
What is the purpose of the Paper of Different Direction setting? When copying a page on any 5015AC series machines with an MR-4000 in my office, no matter... -
Sharp MX3070 yellow shade
Hello,
there are yellow shades when print via PC.
Y-Devunit, Y-drum changed, original toner new.
Problem the same, see picture.
... -
Sharp MX4070 blue partially missi
Hello,
there are fall outs in blue when print via PC.
C-Devunit, C-drum changed, original toner new.
Problem the same, see picture.... -
Help with Clogged Print Head
Hi,
I'm looking for some help with a clogged print head on a Brother MFW-J5730DW.
I was not getting good prints so I did a Check Print quality... -
4345mfp swing plate where to buy a good one? NO OEM left??
Hey guys, just got done buying a cloned RM1-0043 swing plate assembly for a 4345mfp and it did not work quite right....the metal 'tongue' that gets pushed... -
MP305+ randomly not pulling from ARDF, reads from glass. Sensors OK.
Good morning folks.
I've got a Ricoh MP305+ that usually (but not always) will not pull the original from the ARDF, reading from the platen...
