Hello All,
I have a develop 450i with an FS-539 Finisher.
the Alignment plates on the finisher are closing too close together, causing a...
149 results in 0.0393 seconds.
-
FS-539 Alignment plate Issue
-
Digital license plates, what are your thoughts
-
FS534 alignment plates
I have a used FS534 on a C754e with grooved alignment plates. Just wondering if I acquire all the mod parts,how long do they last and how difficult are... -
E230 jam code e220
I am pretty new to the Toshiba line so advice is appreciated! This machine wont feed from the lower cassette, the paper stops at the 2nd transport sensor,... -
C6501 - 2.5mm image shift every 2nd sheet
I Have a very strange problem. Printing 13 x 19 Sheet - 10PT Carolina C2S Stock Coated GO 210-256gsm - every 2nd sheet the back to back registration is... -
HDD hacking
Everyone is talking about sensitive info being retrieved off of the hard drive of a machine that has been recycled or just thrown away. Does anyone know... -
skew in 6501
Hai all,
2 mm skew is apperaing on my KM 6501 from 4th and 5th tray ,
i followed installation procedure no chance,
please... -
HP CLJ4600 magenta background on backside only
Most of the time it's just swap the cartridge, then out the door, except today.
The first thing I do is swap the cartrdge from the machine... -
Having trouble w/ Sharp AR-337 RADF - timing issue?
It jams in the feed section about 1 in every 40-60 pages. All the feed rubber is new. 170k sheets registered in the ADF counter (since new).
... -
C450 DF-601 dog-eared originals when duplexing
Can anyone who had this problem before shed me some light on this one?
I've already dismantled the entire right-side of the DF (exit section)... -
minolta cf 2001 image transfer belt fuse?
does anyone know of a good place to get the fuse to replace the fuse in the unit? I ordered a new image transfer belt unit but they are backordered... -
CTP Trendsetter 800 II Quantum, CREO.
CTP Trendsetter 800 II Quantum, CREO.
- Exposure by Infrared laser illumination thermal alluminium plates with wave-length 830ŋm, technology... -
SC 543 On Aficio 3260
HI Guys
I am getting sc543 on a 3260 colour machine, almost daily now. We have changed thermistors, and the loom to the pwer supply/controller.... -
Cleaning unit for fixer on konica 8050
I am getting a message on panel that says Exchange Cleaning Unit for fixer. I looked it up in the manual. It does not look difficult to exchange, call... -
iRC5180 squeaky, keeps returning...
Recently I had 3 iRC5180/4080 machines start to squeak and annoy customers. In all cases I used the part check for the Main Motor (#1) to find the squeak....
