Hello,
As the title states, I'm having issues with my FR3950 feeding paper. The paper pulls through the first section correctly, then seems...
391 results in 0.1000 seconds.
-
New to me Riso FR3950 not feeding paper to drum
-
Pro 8100s Pressure Roller clips
Hey everyone!
I'm hoping someone in this group can help me find a part number for these elusive retaining clips.
The 8100's fuser has... -
GR3770 - Hook lever not engaging pressure lever
Hey guys, I feel like this has to be a setting turned on somewhere that I'm missing or something. I haven't done much printing at all with this machine,... -
Riso GR3770 uneven print / pressure roller issue ?
Hi I'm new to the forum and just recently obtained a RISO GR 3770 duplicator. The duplicator had been sitting unused for at least two years and all the... -
riso ez220 pressure roller always elevated ans stuck
I have a riso machine which always stuck at the print drum. It turn out that the pressure roller always elevated during printing and cause machine to... -
Riso RP-3100UI Pressure Roller not lowering far enough to get drum back in
Hi All,
I have a RP-3100UI machine that has worked decently for the several years I have had it. A few days ago when I had a jam and pulled out -
irC3200 - prepare a new fixing unit
my irc3200 displayed "prepare a new fixing unit" at the bottom. i had replace the fixing unit with the new one but the display still exist.... -
Canon iR3570 Fuser
Pressure Roller is in good shape but the belt is torn. Can you buy just the belt and does anyone have the part number? -
MP 7500 SC 569
Hi all,
I'm not real big in the ricoh department, mainly sharp. got this trade in that I am checking out. When it powers up it... -
Ricoh MPC 4000 fuser unit clicking noise
Hi, one of my copier MPC4000 has made ''clicking'' noise in fusing unit. I discovered that comes from eccenter which is for making pressure. I puted some... -
Riso FR 2950 hook lever won't catch pressure lever. Sheet dead under drum.
Riso FR2950. Had been making good prints. Stopped three sheets into last press run and is still down.
Found that the hook lever has proper... -
GR3770 jamming every few prints
I was having a bit of trouble yesterday printing on 80lb cover, it would jam every 20 - 30 prints, but then I flicked that switch by the paper feed to... -
Canon iR2016j
Hi
Am having a problem with my Canon iR2016J giving me error ,system error E007.I have replaced Film and is still giving me the same error.Is there... -
2045 problem (full PM done)
HI,
i made a full PM on one 2045.. i change all from fusion, drum, blades, etc but now when i making copies i have this problem.
... -
irc3200 - noise
after makes a copy, my irc3200 machine made a sounds like a spring inside the fixing unit. what it could be? any suggestion?
