108 results in 0.0168 seconds.
-
MX-5141 with Humidity sensor code.
Hello, this machine is giving us F2-58 humidty sensor error. This machine over the years would occasionally throw this code. Now the code will not reset.... -
Versant 180 drum life
I worked on a Versant 180 that ran 60k over the last 9 months. The drums were almost new then, and now they show 0% and OK. I replaced one and it now... -
HP Designjet T830 load paper error/ no paper detected
We have been working on this printer and replaced the OOPS sensor but it still will not recognize the roll of paper installed. Is there another sensor... -
c654e does not stop feeding toner, then c2553, TCR reading in 2
it does not stop feeding toner, since the tcr reading is very low 2
change
imaging unit M(x2)
PRCB
PHRYB
The... -
Which book are you reading?
Don't know what book people are reading? I'm reading "Der Pfau" by Isabel Bogdan. -
Xerox Versant 80 - Toner readings stay at 100%
Hi all. I'm new here but have owned the Versant 80 for a year. Noticed that the toner reading stays at 100% until it tells me its time to change. Would... -
New C220 Owner
Howdy,
First time copier owner. I've had a few prosumer laser printers over the years and they've just disappointed me. Just nowhere near... -
[Canon 5550i] test page is wrong
Sometimes it's correct , but after 3 or 4 prints there are always gaps like the first photo.
Thanks for reading, any comments... -
458E fuser issue
458e. Power on and device comes to ready to print. Fuser (non IH) is cold to the touch, service mode shows 190 c and fluctuating. Constant fuser jams..What... -
taskalfa 5003i
. I have setup the user account ID for the users, however when I print the Account report its not giving me a count on the individual ID, the Copy,print,scan... -
Sharp compatible RFID readers
We've recently gotten a deal for about 100 Papercut installs and I went to order the USB RFID readers and they are $150 each? Is this the normal price... -
iR3245
Can someone tell me which firmware version solved the Locking up of this series? Hadn't seen this in a while, but have a customer with that complaint.... -
both MFP and Control Board dead
Had a surge wipe out a copier C554e
Replaced the MFP and after 2 reboots pressed recover data but it sits here for about 15 mins. (did firmware... -
4002i ETC.. Not reading proper paper size
Hi All
Long time no see.....
Has anybody run into problems with some of the 2 series not properly reading the paper size in... -
Develop INEO+ 554e/Konica Bizhub C554e - 0.00% TCR-C
Hi all,
Just looking for anyone that may have come across this issue in the past.
Error C2551 - Low toner density
...
