Hi!
This is my first post. I maintain to the best level I can some desktop printers at my office. I've done some relatively straightforward...
Search Result
Collapse
132 results in 0.0250 seconds.
Keywords
Members
Tags
-
DCP-8110DN Ghosting on whole page
-
sr3270 not stacking sheets to staple
Good morning all
we have a sr3270 back in our workshop that had the trailing edge fence replaced ( the guide that rotates to hold rear edge)... -
BP-70C series fuser
Has anyone experienced 1 part of a print not fusing? It's on the rear side of a copy or print. I've torn the fuser apart and found nothing that I can... -
C250i No yellow on rear side of page
We are struggling with a C250i and I'm hoping someone have any suggestion.
There is only yellow toner on about 6 cm in the front side fading from...Last edited by B0265; 06-28-2023, 03:37 PM. -
Riso RP 3700 Drum will not unlock
On startup, display reads "insert print cylinder", which is already in position.
Cannot reinsert it as it will not pull out.
Green... -
306ci/307ci ticking noise
I have 3 of these in my shop doing this. 2 306ci's and 1 307ci. It's coming from the transfer belt drive. I can remove the transfer belt and turn the... -
Stop Inner Finisher D1 from Shifting LTRR paper to the rear.
So even with off set off the finisher shifts all paper to the rear. It seems there is no option to let it stack in the center. -
Bizhub C458 Jam 66-05 when scanning duplex
This is a new one for me. All of the sensors are cleaned, and the jam is only presenting when scanning 2-sided. The machine is making an audible noise... -
3815A doc feeder jamming, dog-earing
Hi all,
I have a 3815A with the MR-4000 doc feeder. Right before the original makes the turn-around it will jam. Doesn't do it every time... -
C1060 warming up after fuser rebuild.
Good day everyone , I have a c1060 that says wait warming up forever, the progress bar gets all the way to the last Bar and stay there, all lamps test -
MP6000 Stuck Fuser Drawer
Has anyone ever come across this? I couldn't find anything online...
Machine works just fine, but for some reason, when I went to pull the... -
Another weird out of the box problem. MJ-1109
Must be the week...
MJ1109 + hole punch & 3515AC.
Everything went fine until I checked the hole punch & staple. paper made... -
Utax 350ci clenaning belt problem
hello , anyone have disassembly and replace mechanism movement gear cleaning belt?????
(not inside the tranfert but in body meachine)
i... -
mpc307 paper tray lift bottom plate spring
At the rear side where the bottom lift spring is attached to, at the part of the bottom plate itself (rear).
mpc307 paper tray, bottom lift spring... -
Bizhub Pro 1100 transfer belt shift
Hi All, this Pro 1100 causing paper jams 3301 & 3302. paper jam codes for the fuser unit area. The fuser unit has been service 2 weeks ago and I also...