18 results in 0.0209 seconds.
-
Error 6-624 on diagnostic
Xerox 5000 have error id 6-624 when run regicon setup, anyone can help? -
Xerox c2636 RegiCon fail DC685
I faced the problem. Color missregistration on xerox c2636. I tried to do RegiCon setup (DC685), but fail.
Some times there is a 04-341 error code... -
Xerox WC 7335
I got fault code 008-625 and 008-626 on the Workcentre 7335. Any one have a clue what these are? Thanks! -
7655 Color Registration Problem
Hi all. I'm looking at a Xerox WorkCenter 7655 and the black image is shifted from the other three color images by about 4mm. I don't have a service... -
Xerox color 550/560
I want to replace the drum unit color that I need to do after replacing the additional adjustment, as is the procedure for the exchange of the drum ?...Last edited by rstrek; 10-06-2012, 08:36 AM. -
Xerox dc 250 misregistration and high magenta on all prints
HI all,
i had a problem with my Dc 250 from last wednesday. It started by showing high magenta density on prints.
We cleaned the ros, tried... -
2060 colour Registration issue
Really need some help on my 2060 with a colour to colour registration issue. I've brought this up before but in the meantime I got other issues, these... -
DC 250 Color Misregistration
I have a Xerox DC250 that is having color misregistration issues. None of the colors line up and when I run Regi-Con sensor check cycle and registration... -
DC700 Black printing low gloss
HI,
I am facing problem in DC700 only black color print is coming mate no gloss on print. all other colors are fine having enoguh gloss on print.... -
Colour misregistration on DC3535
I have an odd situation where my DC3535 prints perfectly well in normal/bond mode (even when I print to heavier papers in that mode) but when I try to... -
Xerox 7655 Color to Color Misregistration
anybody sean this before and know how to adjust
the yellow is off by a hairline and DC671 has NG also in the yellow -
Odd persistent banding issue with my DC 3535
Hi,
I've got an issue with lines 90 degrees to the print direction (i.e. parallel with the drums), you can see them on the attachment (there's a... -
Dcc400 error 008-629~ 630
May i know to solve this problem ? i try regicon setup cycle Skew fine setup ok , but in/out setup and center setup adjustment NG . what happen ? tha... -
How to clear Dcc320 code 9-910 ?
Dear Sir, I got difficult of clearing the code 09-910.
This machine originally have a bad NIC, but still can photocopy normally.
After changing... -
Frustrating image issue on 2045 (attached image)
Hi. I have this print problem that only affects the in-board side of the print. The paper looks like it is some how rotating clockwise slightly so the...
