150 results in 0.0352 seconds.
-
Xerox 242 ligth color
Hi i have a 242 and it made some white line on cyan color . I cleaned the ros cyan but know i have all color ligth i attached the photo any one can help... -
Primelink C9065
Does anyone know if the ROS glass can be cleaned without stripping the top off the machine.
There was excessive magenta toner all over the... -
Xerox docucolor 252
Hi guys help with dc252 it print mangenta band after 10cm of beginning of paper I replace drum Ros and dev tank no luck any idea guys for solution?... -
Bad developer or housing? Or something else?
Hi all,
Just put a new developer housing, filled with new magenta developer into a 7760. The previous one was working fine, but I pulled... -
various 061 error xerox 700
Good day, xerox 700, was getting 045-316 for a few days, was able to restart machine and would go away, today would not go away, so reseated the ROS cables,... -
Xerox Color 550 DC250 Soft deletion on Black only
Hoping someone can offer a suggestion for this problem. I have a white band that runs on black only down the page.
Here are the things i've tried:... -
Xerox color 560 yellow missing
Hello all, am having a challenge with a 560 which intermittely loses yellow ,i have reseat the ros cables ,ckeand the ros ,exchanged developer tanks but... -
xerox 700 error code 045-316
hello guys , am having issues with my machine a xerox 700 showing error code 045-316 , i have change the drum unit /developer tank area with another ,... -
Color alignment on 700i after C/K ROS replacement
I replaced the C/K ROS on my 700i and need help to align (fit) the colors with each other. The colors are a good .020" off in circumferentially and... -
Ros system fault wc5875i blank copy/ print
Good day, l have been working on this problem for a few days. The problem is ros system fault and continuous copy/ print blank. I have replaced single... -
Error Code 061-323 Workcentre 7665
Replaced Ros Laser & Cables and still getting the same error message. -
DC 240 CK ROS replacement
Good morning folks,
I recently had to chase down the faded cyan stripe on my print outs and as expected found a bit of toner spray on the CK ROS... -
?cual es la mejor configuracion para el servidor Q1?
Hola amigos alguien me podria ayudar en como configurar tanto el servidor Q1y la copiadora ipc1 para hacer impresiones de archivos de graduaciones universitarias,... -
Docucolor 240 not imaging magenta
Recenlty cleaned both ROS units because of missing stripes in the prints. After reaasembly CYK print fine but there is nothing printing from Magenta.... -
DC 250 Color Misregistration
I have a Xerox DC250 that is having color misregistration issues. None of the colors line up and when I run Regi-Con sensor check cycle and registration...
