54 results in 0.0200 seconds.
-
1250P saddle stitcher error C-1246
I'm getting occasional errors of C-1246. Book is usually caught near the top of the bundle clip area. Does anyone have a parts manual for the SD-501... -
Canon IRA 8295 booklet finisher N1
Hi all, any thoughts on this one ?
I've got an irADV8295 with booklet finisher N1 attached.
Sometimes (not always but often) after a booklet... -
SD501 regulation of step of subtray
I have a problem with regulation of step of tape of subtray ;
I have 2 SD501, the first stacks the folded sheets at exit of subtray with a correct... -
C452 Paper entering FS526 finisher is buckling too much
Like the title says this machine is buckling the paper between the exit of the transport and the finisher entrance. Does it a little on letter and terribly... -
Task Alfa 420i, DF-760, Jam 85
I've got a Task Alfa 420i with a DF-760 (3000 sheet finisher) getting a Jam 85 exiting to the sub tray. I've already got the customer to put thick plywood... -
Toshiba e 520 saddle finisher
Hello friends,
does anyones know how to turn on saddle finisher mj-1028, when i plug sorter in, it won't let me select saddle finisher
th... -
Bizhub 1250 Press FS-532 Breaking exit belt stopper
This finisher has continually broken the exit belt stopper. Does anyone have any ideas? -
irac7280 k1 finisher error e5f2-8002
Installed a k1 booklet maker last week that gave various jams and e5f2 8002 error.so swapoed it out for another new one.this does the same thing.v19 firmware... -
C6501 Power Surge and dead machine
Hi
I am trying to repair a C6501 after an electrical fault caused 415V to go across the customer earth.
The machine config... -
FS-503 Finisher
I'm continuing to have intermittent problems with an FS-503 finisher attached to a SD-501 saddle stitcher on a 1050e. After the stapler staples the set... -
FINISHER CANNOT BE USED in ir7095
las copias y las impresiones pasan sin problemas pero me esta indicando este mensaje; como puedo borrar este mensaje o a que se debe imagino que no va... -
C8000 Stuck on warming up.
I have C8000 that stays on warming up. Wont code out. no service codes in log in service mode. removed fuser and tested in demo unit, works fine. thermistors... -
repost for pmailfl
pmailfl
7095 With A1 Perfect Binder Won't Print
My 7095 with V2 Saddle Stitcher worked fine.
Installed... -
teckat started a topic [Misc] pmailfl /---re-post without (Print at end)---7095 With A1 Perfect Binder Won't Pxxxtin Canonpmailfl /---re-post without (Print at end)---7095 With A1 Perfect Binder Won't Pxxxt
pmailfl---------------- re-post this without (Print) at end of sentence
7095 With A1 Perfect Binder Won't Print
My 7095 with V2... -
7095 With A1 Perfect Binder Won't Print
My 7095 with V2 Saddle Stitcher worked fine.
Installed the Perfect Binder and when attempting to make a copy, the finisher constantly cycles,...
