Hello, thank you all, I am new to the community, my problem with the machine is:
On a vertical letter sheet that is placed in tray 1 and 2, it gets...
361 results in 0.0466 seconds.
-
bizhub 601 paper jams in reverse registration
-
-
Lexmark MX410 slowing down in print speed after 3 pages
Hello,
Lexmark MX410 came in for repair and the fuser needed to bereplaced. I have had replaced the fuser with the new one, reset it and this... -
HP Z6 Plotter
I have a custpmer that is having issues with the Single sheet feeder. It sends the sheet straight thru and doesnt print on the page Are there any known... -
how to change the count of an A3 sheet
Hi everyone... do any of you know how to change the count of A3 sheets? Let me explain better... when I photocopy or print an A3 sheet the machine counts... -
RIcoh MP 402 ADF bending originals in corners and prints are cut off on the left
Hello, I went on a MP 402 call yesterday and there are two problems:
1. The ADF is bending the originals in both of the leading edge corners.... -
NVM Sheet location Altalink B8055
Does anyone know where the NVM sheet is stored on the B80xx copiers?
I know the C80xx has it in the paper tray 1 storage pocket. The same... -
Kyocera P21235dn jam at rear
Ok so I have a fleet of P2135dn printers they all fail with the same issue I've been unable to solve with a paper jam at rear with a full printed sheet... -
C759 93-10 code
Happy Friday all,
C759 jams when running duplex. Running just one sheet seems to be fine, but when a second sheet is added to the path a... -
Booklet fin W1 Pro
Hi,
Have the above finisher on a VP115, just shy of a million clicks. When stapling on top left corner intermittently and usually the... -
Hello, I have this machine in service, it has a defect that I can't understand, when I take the paper the sheet is taken but then as if it stops for a... -
Drum unit bk c258
Hello lads,Has anyone ever tried to put the original bk c258 drum in the color ones? Obviously by removing the side plug and changing the chip. Because... -
Canon C5560i lll document feeder registration problems
Hello, registration off about 10mm in feed direction.
Cleaned roller and dusted off sensors to start with
Then adjust doc stop in service... -
Task alfa 2551ci jam 0511
Hello, I have this machine that causes jamming problems jam 0511, I find a sheet stuck in the fixing unit and a sheet immediately after the paper pick-up... -
C700 Jam
My c700 is jamming at B4 on first print. Cleaned rollers and fed from tray 1&2 but no luck. Sheet is 100# gloss text'
Any suggestions!
...
Leave a comment: