42 results in 0.0240 seconds.
-
Help - print on both sides of custom paper size 4505AC
Hi Guys, im new to Toshiba, i need to print on both sides of custom paper size, i ve set 210mm x 325mm Drawer 1, then i cant not use duplex, just 1 side... -
C224 Flashed to E model cant printing more than 1 photo in duplex mode
My 224 flashed to e can't print more than 1 sheet of paper of images before getting jammed. I printed 10 pages of normal text with duplex so 5 pages in... -
FalconMetalsChris started a topic Need to know what part this is for Kyocera KM-1650in Other BrandsNeed to know what part this is for Kyocera KM-1650
On top of our Copier, there are two parts that are on the metal bar that goes across where the original paper being copied gets pulled in.
Both... -
How to scan ID card on MP C3003
Hi, an easy and old question
, is it possible to scan both sides of an id card on a single page with an mp c3003?
Thank you. -
xerrox 7855 copier when copying and scaner 2 sides
hi! i have a problem with xerrox 7855 copier when copying and scaner 2 sides .side 2 always get blue background .can you help me ...thanks...Last edited by cmt; 06-14-2021, 07:16 PM. -
mpc3002 L.E. registration ADF for rear side
The serv manual says this about it:
sp 6006 - 003 Leading Edge Registration
Adjusts the amount of paper buckle to correct original... -
Pro 951 - back side image position varies
Hi all,
I have a strange problem on Bizhub Pro 951. Customer uses A3 80gsm plain paper and after adjusting and matching both sides from "both... -
SP5210 DF jam
Howdy folks,
Got a SP5210 that has J058 jams which is paper stays at DF reg sensor. Only happens on duplex and only on the last flip. Machine... -
Bizhub 350 BW
Hello All
Replace drum/compete developer and machine makes great copier. However, when we make duplex copy. The copies have a lot of dots... -
HP OFFICEJET PRO X476
Hi,
I am getting the following error on the HP officejet pro X476
0x6100000c
Also on another one black print is... -
ir5075: ADF 2-side problem
hello seniors ..
I have problems with ir5075. the Adf can't scan two sides in one go / one-way (as usual). It became like a 2-sided scanning using... -
c2230 started a topic IR-Adv problem aligning both sides when printing booklet through multipurpose trayin CanonIR-Adv problem aligning both sides when printing booklet through multipurpose tray
Hello. Can someone direct me as to how to make sure both sides of a printout from the bypass tray are identical in position? The both sides are off...Last edited by c2230; 11-06-2013, 07:35 PM. -
Noise on paper lift
Hi
Got a 520i, with a large capacity tray underneath it. The lift is banging as it gets to the top, and has taken out the lift motors. Kyocera... -
1050e dog-eared
hello,
I have this copier 1050e who gives me dog-eared on 2-sides in finisher Fs503 when I print in main tray -one side is OK. I have also...
