118 results in 0.0310 seconds.
-
key counter interface unit MP4000 - what signals are on particular pins ?
I had installed a key counter interface in my MP4000 machine. I want to use it to plug in an external controller (computer software via a I/O card). This... -
Very Poor quality images
Can anybody suggest what to do about the attached images, image units and transfer belt have been changed but as you can see the image is awful.... -
Remove paper from finisher
I have an ES452 with an MJ1101 that shows "remove paper from the finisher" when trying to output to the staple tray. I searched FYI, but didn't... -
sc 672
i am facing sc 672 in mp 1350 katana machine gestetner any one can give me hints how to resolve it -
Ricoh AF850/1105 SC322
I have an Aficio 1105 copier in the field that errors SC322.
It will print its own SMC reports and copy reading report all day long.
... -
IRC 3200N screen blanking out
I have a situation with my IRC 3200, whenever a print is being sent to it, after processing/receiving (as shown below in the panel) it stops and shut... -
L4-31 after firmware update on MX-4501N
I'm working on a customer's copier that has a constant L4-31 that showed immediately after the copier was updated from firmware 2.08 to 2.10. I have swapped... -
error code 240
Hello
Could anybody tell me how could i reset error code 240 at canon cp660. I don't have service manual for reader unit. Thank you!... -
IR 3300
Good day
I have canon ir 3300 with E261 error
Replaced DC controller and Power supply board and same error.
Thanks. -
Sharing Canon knowledge
I am new to Canon and want share with you experience and knowledge....
hope I could have a abbreviated explanation to these:
CQ Issues, R-con, -
Canon iR Advance C2020i
Hi,
I have a problem with a Canon iR ADV c2020i by the error code E009.
E009 in the technical manual explains how to break the sensor by... -
IR3235 half blank copy
Hi all,
I have specific problem on IR3235 with half paper blank copy?! See attachement!
First I have to changed drum unit, developer... -
Minolta Di 350 Jamming on the By Pass
Hi there,
My Personal Minolta Dialta Di 350 is Jamming only at the by pass. The printed paper comes only half way out and then it signals... -
Ricoh MP C4500 Fax
When you fax something to the C4500 you get a ring no answer.
It will dial out but not receive calls. The phone line is working I plugged a phone... -
Minolta Di351 ADF issue
When I install paper in the ADF of a Minolta Di351, the sensor signals that the feeder door is open and won't allow copying. I tested the sensor and it...
