Hello,
Lexmark MX410 came in for repair and the fuser needed to bereplaced. I have had replaced the fuser with the new one, reset it and this...
67 results in 0.0298 seconds.
-
Lexmark MX410 slowing down in print speed after 3 pages
-
m602 13.A2.D2
I believe I have exhausted the things to check on this error. Trying to see if there's anything else I have missed. The rollers are good. The small gear... -
mpc400sr with sc797 defective sensor solenoid
greetings
i got a text with a machine with intermittent sc797 code
no 797 in manual but a vague bulletin for sc797..
sensor solenoid... -
HP Color Laserjet MFP M680f's with 59.00.F0 errors
Hello techie's,
Hoping someone has experienced what I'm currently experiencing on a couple M680 machines.
I currently maintain 10... -
Biz554e J3205 jams with new exit unit
I have a customer with a 554e that is getting intermittent J3205 jams that started after I replaced the exit unit for a separate issue about a month ago.... -
Ricoh c3503 Noise
Hi,
Ricoh C3503 Development solenoid is giving noise. Solenoid replaced already.In I/O mode its orking fine. When checking Transfer Drum... -
Work Centre 7228 Bypass tray not working
Hi
Had a massive jam in bypass tray, it fed several sheets of card at once. I removed tray and found cog mount plate had bent with the force.... -
Biz C454e jam code 3205
Customer has 2 machines jamming with jam code 3205 when duplexing. The service manual shows like 10 things this could be. Motors, clutches, etc. Figured... -
konica minolta c284 c224 F/R problem
good morning everyone
I read in the forum several problems about duplex and jam 3205.
I have the problem of this jam in two... -
M577 not picking up paper from Tray 2
Hi all.
I have a large account, where they have a single M577 (along with multiple M477s and a variety of other desktop single- and multi-function... -
hp 3050 feed solenoid repeatedly firing
This was brought into my shop completely in pieces. I have never had the opportunity to take these apart before, so I had to figure it out as I went.... -
Fin Transport solenoid issue mpc5502/3/4 and more
Is it the solenoid or the circuit board thats causing these transports to malfunction? i have several run ins with this issue,, i have dis assembled a... -
Hp color laserjet cp3525dn 59.f0 error
Hi everyone,
I have an HP Color Laser Jet CP3525dn on the bench that is throwing a 59.F0 error code. I have replaced the fuser drive... -
Riso EZ 220U Pressure Solenoid
Hello.
I have a Riso EZ 220U that is jamming because the pressure roller solenoid wont release. I have checked all the timing and the position... -
CP 4024 59.F0
I read a tip that this 59.F0 code on a CP 4025, was caused by a sticky solenoid in the fuser drive assy. I tore this baby down, and sure enough that...
