17 results in 0.0157 seconds.
-
KMBH c554 Squeek
The machine has a slight squeek when its idle? nothing on or running, coming from what seems to be the fax, i have lubed the fan right behind the fax,... -
IM C4500 / MP C4504 Series - Noise from Black PCDU
Problem: Noise is heard when the black PCDU is in motion. This can be verified through SP output check 5804-136 (Transfer Drum Motor K: Standard Speed... -
MPC2550 Screeching Noise when copying
The screeching noise gets louder the longer the machine is copying. Running the ITB in Service Mode produces a very similar sound, so I changed the complete... -
C652 Fuser squeek
Hi,
We have three C652's which have a squeek in the fuser unit. Try a we may, we cannot get rid of it. Has anybody had same prob. if so how did... -
Why can't we write the error code messages??
A customer called the shop with a paper tray code the other day. So I call the customer and told him it meant something was wrong with the lift on the... -
C462 squeak ee fuser
got a squeak in the lower drive gear, that keeps coming back
is there a fix? -
Bizhub C451 Fuser problems
Is anyone else having fuser issues with this model? We are having MUCH higher failure rates with the 451 than the 353 etc. Noise, rollers getting twisted... -
Bizhub 452
Does anyone know of a solution to a sqeaking brand new bizhub? It has not been fixed after several attempts to change out the adf motor and testing other... -
Brother MFC 7340
I have a question about a Brother MFC 7340, it had a squeek that I couldn't find at customers location, so I brought it back to the shop. That problem... -
Brother MFC 7340
I have a question about a Brother MFC 7340, it had a squeek that I couldn't find at customers location, so I brought it back to the shop. That problem... -
C6500/5500 service Tech Needed in O.C.
Does anyone know of a good service tech in the Orange County, CA. area? That actually knows about the C6500/5500 models? I have had too many "certified... -
BH 600/750 fin wistle & Mach end cycle noise
Hey everybody. Gotta constant wistle from the fin. The longer the copy run the louder it gets. Removed all fin covers & lubed all bush. & bearings.... -
maddening squeeling on km 8030
I have been searching for the source of a maddening squeel on the km 8030... I greased thee gears on the fuser, the transfer belt, even the gear box but... -
MPC 2500 DF squeaking!!
customer complained tha it jams in the doc feeder. paper is not feeding through sometimes to start off with.all the rollers are clean. ive tried turning...Last edited by ash_572; 10-05-2009, 11:06 PM. -
KM5035 Noise
Has anyone come across the noise in a 5035 when it get up to near the 1,000,000 mark??
I put new clutches and gears on and greased the shafts (duplex...
