238 results in 0.0409 seconds.
-
HP M652DN 57.00.88 Error
Machine is throwing a 57.00.08 error after initialization. Tried a new fuser and transfer belt as it was making that "grinding sound" when powered... -
Voltages adjustment for Wear & Tear.
I have a vague understanding about this that I wish to clarify or learn from an experienced tech. When performing calibration such as U410 & U464... -
printing on "never tear" paper with konica minolta bizhub press c7000
Hello everyone.
Does anyone know if it is possible to print on never tear paper using konica minolta bizzhub press c7000? Is there maybe... -
I Love Kyocera
Finally got to work on a 7052ci. Kyocera seems to be the only brand that listens to techs and improves ease of work accordingly. The "waste system"... -
Ricoh MP9003 Lead Edge has small tear in one spot
Hey Guys
I've a MP9003 which intermittently puts a small tear in the lead edge of the paper. It only occurs during duplexing and appears to happen... -
c2503 sometimes tear in paper from all trays
Sometimes a littel tear is formed in the copypaper (somewhere half way the paper) with a little dog ear, bended away from ITB site
(so, towards... -
MX-FN27
Is anyone else having problems with these POS finishers? The one I have at this time is sending the papers out not straight. When they exit the finisher... -
Kyocera M5521CDW
I have a Kyocera M5521 that is giving a banding pattern while printing or copying (see below) I'm thinking HV unit or control board. Before I tear into... -
KM C8000 - New 2. transfer unit making a mess..
Just replaced the secondary transfer assembly with a genuine new KM unit..
now the machine soils the back side of the sheet with no apparent pattern..... -
Xerox 4110 Transfer belt keeps tearing
We are currently looking after a Xerox 4110 B&W machine that continually rips the transfer belt after 100 or so copies on A3 or SRA3. I can run thousands... -
hello everybody
anybody have the tear down and reassymbly instructions for a fuser out of a Toshiba 451c? Thanks so much. -
Xerox Docucolor 2060 paper feed jamm all trays
I installed a used 2060 in my shop (1.5m impressions), and have been working on getting it operational for several months. The images it produces are... -
Can a FS-601 finisher connected to a BizHub C350 Staple and/or Fold without copying?
Does anyone know any tricks to allow me to Fold, Staple, and/or Hole Punch documents in my FS601 finishers without running them through the copier?... -
DC 12 Pressure Roller tear
I have seen this problem repeated a couple of times and keeps wondering what the exact cause is. One or two strands simple tears off around the pressure... -
Opinions on recycled machines - MPC 2500 in particular
Hi guys -
I'm a repro person (sorry!!) and not sure I'm posting in the correct section.
I've just been recommended by Ricoh...
