hey everyone - Merry Christmas!
i attended this machine and the Upper Fuser Roller was scored by a picker finger leaving marks down the prints...
64 results in 0.0214 seconds.
-
DocuCentre S2520 error 010-311
-
MX3070 fusing belt versions
I know the MX607FB is the OG one. I've used MX608's and seem to have no issues, but not tested a lot (designed for MX6070)
The MX601FB looks nearly... -
WC7775 fuser error 310- 322
Hello, someone has experienced torubles with this error code?
i have tested NC thermistors with multimeter and it seems they are ok, i compared... -
Konica C368 with error C-3425
hello, got 1 machine with error C3425 i wanna know if i can do something to try to fix this...
i changed the fuser for check dcpu and prcb problems... -
Toshiba E202L fuser thermistors needed
Somehow dug a hole, so I'm trying to climb out as cheap as possible. Anybody have the thermistors for $30 including shipping? 585-729-8058 NY -
MX7090 MX8090 H3-01 & H3-02 Errors
Good Moring Sharp Forum
I'm putting this post out there to see if anyone else is experiencing this issue
We have about 6-7... -
thermistor
thermistor for biz 420 look the same those thermistors in biz 350 can i swap them? -
Got from Chinaman.......
...... NO, not egg noodles but a set of thermistors for the BH-C-280/360 series.
I had to rebuild the fuser since it made over 600K. The...Last edited by Hansoon; 01-23-2021, 05:30 PM. -
e-Studio 457, not fusing...
Hey folks.. these machines have (relatively) new Fusers, but I'm still having offset issues on some of them. The usual fix is to make sure that ground... -
MPC3002 SC571-00
Hi all, I've got this MPC3002 with error SC571-00. 5810 doesn't reset and the PR thermistors are pretty torn up. Just wondering if the thermistors are... -
Error SC541
Error 541 and 542 at aficio 1022 (i know , i know it is too old etc but too little copies made and replace it is out of question). I mesured thermofuses... -
Older Ricoh fuser question
Had a "stupid" question about the thermistors on the older style fuser. The one I'm working on is a MP2550 B&W. The fuser is very common... -
Spc431 fuser
Hi All
Does anyone know if a SPc431 fuser unit would work in a MPc300?
We're having an error of SC555. Thermistors have been replaced.... -
SC 552 AFICIO MP 5500
aficio mp 5500 keeps throwing sc 552 on startup. when i cheat the doors i realise the lamps do not come on.
i have changed the three lamps and... -
Ricoh NMP C7501sp SC-551
Hi all
I have error sc-551 on an MP C7501sp which relates to the thermistors...
The plastic coating on one of the thermistors...
