203 results in 0.0436 seconds.
-
MX-C301w not feeding
We have one of these machines and it was showing no paper in the A4 tray, then we found a paper actuator had fallen out so we refitted it back in and -
TASKalfa 4052ci error 441
Hi all, not sure if anyone can help, I have a 4052ci which constantly throws a system error 441 every day when sitting idle , user has to power it off... -
423 C2201 - only on duplex
I know the 2201 code is for toner bottle rotation. Problem is, it only throws this code when duplexing. Any ideas? -
C2500 on 6501i
I have a 6501 throwing a c2500 error. I ran a U030 and it passed the motor test. When powering on it throws the c2500, unless the main cover door is open,... -
Kip 7170 Code E-0920 ??
Unless I missed it didn't see E-0920 code in service manual?
Weird thing is all aspects of machine work fine and only throws... -
Toshiba 5055c keeps jamming but no paper is there.
So I have a 5055c with the 2000 Sheet Large Capacity Paper Trays. When we print, it will work for so many pages, then the right jam access cover, the... -
Black pages in Ricoh MP 9000/1100/1350
Hi guys!
I need to consult something because I have already tried absolutely everything.I have many ricoh pro 906, mp 9000, mp1350 with the same... -
Fs-533 code 1102
Throws code after trying to load staples. Took it all apart and cleaned it and still throws the code. Looks like it tries to staple a few times then... -
SC-320 on a Lainer LD150SP
I am doing work for a friend on his copier. It has a SC320 error code so I replaced the polygon motor but it still throws the code. I also tried to... -
Konica Minolta 1050E with SC36-06, changed TH3 and TS2 can't get rid of code
Replaced TH3 and TS2, Turn on service mode and it shows 3-0 not 3-1, doesn't matter what I change it to it still throws the code. Kida stuck at this point,... -
-
adv fin a1
Good day! I have an ir adv 5035 inner finisher a1-it was installed 1 day ago-latest firmware.
Now it throws error codes and jam codes for the finisher.... -
A Simple Introduction Thread
I'm from Butte, MT. New to copier service. Only been working in it for 6 months now. Working for a Lanier dealership. And I have gone to Ricoh University... -
Toshiba E Studio 2500/3500 doesn't recognize finisher
What's the procedure to tell the machine that it has a finisher? I've installed the bridge unit but when the finisher is plugged in it doesn't appear... -
Canon C1 throws e490 when DADF is pluged in
Hello everybody, I have a client that has a C1 that comes up with e490 when the DADF is pluged in...I tried finding the code in the service manual for...
