16 results in 0.0118 seconds.
-
3070L and 3080P scattering toner
Both the 3070L and 3080P I work on have varying degrees of toner scatter from the transfer belt cleaning module. What should I check in order to fix... -
Transfer Belt Cleaner - Xerox dcc 240
Hi,...
I am new here and got problem with my xerox dcc240 which i imported from Australia and no technician here can help me with it....
... -
Toshiba 3510 ce40
Hi- Does anyone have a copy of the instruction page for CE40 on the toshiba estudio 3510 that they might be willing to email me? I have a copy of the... -
3100c dumping black / dirty K background
I started with about a 3% k dusting all over the front of every copy or print job.
Very even disbursement of Black toner, checked w/loop, just... -
C2257 Bizhub C550
Evening people.
Have a C550 chucking up 2257 codes.
Have checked cleaner drive motor, cleaner drive gears, transfer belt cleaner... -
MPC 2500 colour shadow on top third of copy
I've got an MPC 2500 with about 130k black and 37k colour on the clock producing a coloured shadow usually magenta or yellow around the black print on... -
C550 with brownish strip at top and bottom of page p-21 code
the strips are the test strips being written on the belt right inline with with the front and rear color registration sensors top strip is cyan and yellow... -
Bizhub C203/253/353
Hello, anyone having problems with the sep claw on the transfer belt flipping under and wrecking the belt and if so has anyone been taking them off? Had... -
Xerox Workcenter 7235
Is there any NVM code when replacing Cleaning Blade and transfer roll?
Regards,
Hugo -
KONICA C350
Trying my hand at rechiping the iu's, and the fuses on the fuser and belt. Anything i need to know or have to do after i replace chips and fuses? -
Need SM for IR C2058
I can't pull the drawer out far enough to remove the transfer belt cleaner unit. I won't risk damage to the belt so a manual would be great. I may be... -
C350 dumping waste toner?
I was just wondering if anybody has encountered this? I have now had two bizhub C350 machines dumping the waste toner everywhere. The waste toner bottles... -
Aficio 6513 Toner Scatter and Tire Marks
The copier (Aficio 6513) was working fine when the "Toner Low" message for magenta appeared. I ran a couple hundred more copies and then replaced...Last edited by Guest; 10-10-2007, 11:30 PM. -
FS-C5016n Led Array
I got bad led array on one of the drum units, all i get is tick marks where that color is to appear on the print. I've changed it from drum to drum, and...
