I wasted a good hour trying to get a e4525AC/GD1370NA fax board connected to a GrandStream ATA to send a fax.
I played round with all kinds...
12 results in 0.0183 seconds.
-
SalesServiceGuy started a topic How to configure a GD1370NA Fax board to work with a Grandstream HT801 ATAin ToshibaHow to configure a GD1370NA Fax board to work with a Grandstream HT801 ATA
Last edited by SalesServiceGuy; 04-07-2024, 02:33 AM. -
KM-3060 CF423
KM-3060 CF423 error even after replacing the Fax kit. The error occurs only when receiving faxes. No problem transmitting. Any ideas, please?
... -
IR3300 Fax Image on Report
Might anyone know which setting will place a portion of the faxed image on the report sheet that prints after a fax is transmitted? Thank you. -
Konica 7020 will not transmit fax
I have a cutomer with a konica 7020 fax/ print. Fax stopped transmitting. It recieves fine but will not transmit. Put a differant fax unit in the machine... -
LC 830i error codes
I am getting ##283 when transmitting and ##0200 when receiving, can anyone help? -
Multilogo faxmachine
Customer has a Panasonic DF-1100 fax. This machine is called by Panasonic a "Multi Logo" fax. One can store around 15 different sender names... -
Bizhub C220 - Scan to Email
Hello.
We currently have a Bizhub C220 that is setup to scan to email. These are the steps we have to follow in order for it to work:... -
LaserClass 710 series TX failures
We have had mystery trouble sending with these units. Sometimes it will transmit and sometimes it will not when sending to the same # (not a busy signal).... -
Set the Fax Transmit Level Toshiba 4511
Hi,
I have a Toshiba 4511 with fax card. When i do a fax test using Telstra, the report says that the Transmit Level is 4.4dB too low. ... -
Transmit recieve error (0x3101)
Hi guys
I have a strange problem
We have over 50 3050 and 5050 mfd's accross the country with one customer using one network.... -
-
Toshiba fax parts
can anyone recommend an aftermarket vendor for Toshiba fax parts, I\'m looking for fuser rollers, se pads, feed tires for DP80, DP120, and all the TF...
