Hi,
My first post here!
I have a Konica bizhub C253 and I was changing the orange pickup rollers for trays 2 and 3. After finishing...
34 results in 0.0108 seconds.
-
Where does this small spring on a Konica C253 (changing rollers on tray 2 & 3 ) go?
-
iR2530i not detecting Tray 2
Hi everyone
I know she's an old lady, but I've come across 2x iR2530's with low mileage for a very good price that I'm hoping to restore... -
Sharp MX-M623N Copying/Printing Slow
I've been working on a 623 that runs normal out of tray 1 but not tray 2. Tray 1 copies and prints at 62 ppm like it's supposed to, but tray 2 outputs... -
C454 Paper Skew/Jam from Tray 2
Good afternoon,...
I have an issue with a C454 and paper jam/skew from tray 2. This machine has 4 paper trays and they all feed paper apart -
Part number found; not in manual -- M402/M426
I recently had a machine (HP M426) where the actuator/sensor that registers that there's paper in Tray 2 got banged out of whack. The machine registered... -
HP LaserJet M4345MFP tray 2 no feed
HP LaserJet M4345MFP will not feed paper out of tray 2. Replaced the pick up and feed rollers. When I removed the torque limiter it fed paper but often... -
Ricoh C651Ex
Looking for help with a J054 jam. The paper goes through paper feed and just sits in the vertical paper path. It's not crumpled or jammed just sitting... -
Savin 8035 Misfeeding
What would cause this copier to misfeed in tray 2 only? The misfeeds only occur when the paper is being pulled in 11 x 8.5. I've never seen it occur when... -
Konica Minolta bizhub c35 misfeed tray 2
Hi I currently working on a c35
the issue I'm having is paper misfeed from tray two only
i have replaced the feed tyre sep pad and clutch.... -
paper trays
How can i set up when tray 1 finishes it goes to tray 2 to finish copy job. It is a cs-300I.
Thanks. -
C353 Tray 2 cannot be used currently
Message as above, and red light blinks.
Everything else works. Just can't see Tray 2 in the menu and no paper is taken. -
phaser 6360dn
anyone have part numbers for tray 2 pf clutch and registration clutch. thanks t -
Finisher T1,W1 Tray 2 sensor
I have a couple of T1,W1 finishers that have the tray 2 sensor broken,is there any way to fix this problem? I have a pictures to show which sensor it... -
J17-04
Pro 1050 -- jams up using tray 2 and J17-04 pops out. you can print sometimes 15 pages then jams up with that code. sometimes J12-03 too. clutches and... -
Bizhub C280 Document Feeder Problem
Hello everyone _please Help
I am having a curious problem with the Document feeder DF-617 of the ineo+280 (bizhub C280).
The...
