108 results in 0.0236 seconds.
-
Aficio MP4002
Customer called with smearing but left no samples. Based on conversation getting prints out where toner is not fusing to paper. This unit is used mostly... -
bizhub c4050i 5min warm up and paper not recognized
Hello,
like the title says, the c4050i has a long warm up and the paper is not recognized, and that already happened with the same model... -
Toshiba E355 Code C410
I replaced Thermistor check fuse and Lamps OK Machine come on, goes to warm up and back to C410. Fuser unit not hot. -
Warm up procedures
Hello,
I found that machines have two types of warm up procedures displayed on panel :
A : Warming up, please wait -> Ready... -
ps22sp started a topic 7845 gear noise like gear not engage ,after print heavy stock from by pass trayin Xerox7845 gear noise like gear not engage ,after print heavy stock from by pass tray
print from bypass tray , 80lb cover 15 sheets ,out from center
every time warm up ,now
start up warm up gear noise very loud ,like gear... -
MP6003 long minute warm up after sleep
Hi all,
I have a few MP6003 but one of them seems to take much longer to warm up after going into sleep/power save.
Only seems... -
Kyocera TASKalfa 2550ci
Hi I've got a 2550ci and the display is not coming on..
Machine goes through all its warm up but screen never comes on.
Any help a... -
Canon IR C2550 has error E000811-0000
Just replaced the drums on a C2550, started up the copier and after warm-up got a E000811-0000 code.Says to hit shutdown button, turn off, restart and... -
screen information gone screen go blank
c3220 machine start up and warm up complete
a while screen go blank no information on the screen
why? -
MP C4502 Energy Save mode
When in energy save mode this machine will sit quietly for around 2 minutes, then you will hear a relay energizing a circuit. Is this the fuser staying... -
C352 Fuser Popping
Hi Guys,
I have had several of these in the last month or so where the fuser looks perfect but makes a popping noise. I watched the fuser during... -
BIZHUB 750 ERROR C3502-3
Hi Guys
I have my bizhub 750 wich is showing error c3502,3503 i have tried to resert it but still apears,the amchine does all the warm up process... -
BizHub 250 locked up
Machine starts to warm up but freezes with the Kon/Min logo on display. I seem to recall this has to do with the NVRAM? Also heard of a special program... -
Constant Warm-Up on BH 600
Hello,
I have a BH 600 with 3.7M. When the operator turns on the machine in the morning, it never gets past the warm-up phase. When I turn... -
Canon IRC 3380 e840-0000
I have an irc 3380 with an e840-ooo code. Reading the posts it looks like it is the shutter in the fuser. Is it just a matter of putting the shutter...
