172 results in 0.0302 seconds.
-
BP-50C31 - Slow printing photos
Bare with me, I am just getting back into the networking game. Customer states that their photos take 40 to 50 seconds between pages. They set the photos... -
Kyocera 4052, 4053, 4054 MP Tray Wire MPF
I am installing the wire that holds up the MP tray in a TA3253ci. The customer damaged it pretty good and I am unable to find an image on how the plastic... -
Corona wire spool
Anyone know where I can buy a spool of 80 micron gold plated tungsten corona wire? I use it for the Kip wide format machines.
Looked online... -
FYI J7920 DF-7130
Scenario, Paper is in position to be stapled, stapler in correct position and throws jam code. I had replaced the staple unit, updated staple base and... -
DP1820 "corona wire" material (E03-10)
Hi,
The instructions of replacing the tone of a DP1820 includes moving the corona cleaner in and out a few times.
I've done that, now... -
KIP 860 Corona Wire Replacement
Does anyone have any tips on how to properly replace the corona wire on a KIP 860 color plotter? Every time I try to replace a wire on these it snaps.... -
corona wire
i'm looking for gold corona wire for a KIP7170 to buy can any one spare one or sell willing to buy. -
FS-539, completely dead, or is it? Interesting experience today.
Had an interesting bit of troubleshooting today. Maybe this will help out someone else down the road with a similar issue.
One of our techs...Last edited by femaster; 10-27-2021, 12:11 AM. -
Intermittent SC 204 on Ricoh MP301
HI Guys,
I have a MP 301 displaying SC 204 Polygon Motor Error after 30 - 40 prints.
The device has approx 190K on clock.
Print... -
LU-202: Replacing the Lift Wires
Hello,
I just finished repairing the LU-202 that came with our machine. It was broken when we got it, and I thought by sharing my experience... -
Relay Wire Service Part
I was going thru the tech bulletins and came across one for a wiring harness that connects the main body to the right side conveying unit. The purpose... -
MOVING BLACK LINE
Hi all,
I have a Ecosys 2040dw in the field that has "moving black line-itis." It's the typical "fuzzball on the charge wire"... -
c454e fuser 220 volt or 120 volt?
Gentlemen.
I purchased a fuser for a good price. The box says it is for 110v. The lamp terminal has 4 wires coming out of it. From memory (don't... -
Sharp MX-4101n error F1-00 finisher error
At original service call couldn't get message to go away even after on/off and unplug until I messed with 3 wire cable harness that attaches to up/down... -
SD-506 Drive Wire Replacement
Anyone have any direction on how to replace the drive wire? or if its possible to do in field?
anyone selling a used good trimming...
