Search Result
Collapse
48 results in 0.0215 seconds.
Keywords
Members
Tags
-
Ricoh Mpc 2504ex power on then off
It started after Florida hurricane came through. Turn copier on comes up to the point where icon might be display then says shutting down. I think it... -
Biz 224e Code C2152
This is one code I thought I would never see now that all the C253's are gone. I've changed at least 30 of the trans belt sensors with new style on the...Last edited by copyman; 04-05-2022, 09:58 PM. -
MX3050 and newer electrical connectors
I have a silly question regarding the 2 wire connectors on these models that go to the paper lift motors and the clutches. I have a hard time releasing... -
Network Cabling
I have to do an install tomorrow after delivering the copier yesterday into a new luxury home office.
Upon inspection, the building contractor... -
Kyrocera-4501i adf tray
Looking for a part number for this machines adf document tray, someone pressed down on it and snapped the hinge where the wires come through.
... -
Ricoh Pro C900,sc 531-10
Hello, I have a sc531-10 error code, the service manual refers to fusing exhaust fans (one of them).
I have cleaned the fans, even I interchange... -
LU-202: Replacing the Lift Wires
Hello,
I just finished repairing the LU-202 that came with our machine. It was broken when we got it, and I thought by sharing my experience...👍 1 -
MP C3003 - very unusual output
Hi All.
I got called in a couple of days ago to service an MP C3003 that 'apparently' was making some strange noises, and that there were wires...Last edited by sandmanmac; 02-12-2021, 12:24 AM. -
PC410/415 lift wires
Is there mod to stop lift wires coming out of the grooves of A2XM622400
I recall someone mentioned sticking mylar over it but cant find any... -
pbrooks259 started a topic HP Designjet 4500 Scanner-after a while starts only scanning center one-third onlyin HPHP Designjet 4500 Scanner-after a while starts only scanning center one-third only
Help. HP Designjet 4500 Scanner-after a while, several to many minutes, starts only scanning center one-third only (scan image attached), only between...Last edited by pbrooks259; 04-18-2020, 12:34 AM. -
Sharp MX-4101n error F1-00 finisher error
At original service call couldn't get message to go away even after on/off and unplug until I messed with 3 wire cable harness that attaches to up/down... -
Pin-out for DF-790
Does anyone know the Pin-out of the DF-790 FN? What I need to do is be able to hook up the bracket wiring harness without a finisher. Essentially cheat... -
Ricoh MPC 2551C
Will a toner end sensor for a MPC 1100, 1350, 3000 work on a MPC 2551. From picture sensor looks identical other than wires???
Thanks!!! -
konica minolta 1050
Hello, a foggy background on the on the second face of paper the first side is good but the second side is bad i changed the wires but the same problem,... -
SC406 error on Savin 3406WD Wide format
wide format just started printing light to blank pages mid job then threw SC406 code.
machine was fine 2 days ago when I replaced a broken caster....