59 results in 0.0288 seconds.
-
Pro 8085 and 8085
Wonders whats the differnt btween 8085 pro and 8085 ? Can any one told me the advantage and disadvantages of it -
Toner ricoh aficio 1027 can use on plan printer mpw2400
Hi Friends
Did you know that toner for Aficio 1022/1027 (katun refill toner) you can use for plan Printer MPW2400?
May be you... -
The Wonders of MXC311
Hey Guys,
I had a problem with an MXC311 transfer belt. It had a created brail like pattern across it (See photos) I put a new belt in and... -
Toshiba e 600 change logic board
Hello new friends,
i changed new logic board, and now total counter meter reading different, old meter only 200k and now with new logic 400k, how... -
CS 400ci magenta background.
I have a CS 400ci that in the middle of a copy job started giving a magenta background, even in th blank areas of the page. Tested prints and they were... -
Help In secure printing
Hello all
This is my first post in this Forum.
I Have this canon printer 2520 at work and I need to restrict the printing to a number of... -
any set up techs?
i'm an in-house set up tech. we sell new and used canon and ricoh (lanier) copiers. everything that we sell goes thru my shop.
i'm always... -
Ricoh Aficio 700 ADF Problem
We have had problems w/minute cracking w/One Way Bearing Drive, which we've fixed by prying the one way bearing loose and sliding it back on with glue.... -
Cleaning Feed Tires
What do you use to clean feed rollers? One of my guys swear by WD-40. I've always used 70% alcohol.
You? -
Sweaking noise in the MXM453
I have had plenty of calls in reference to sweaking noise while the machine is running, I have been cleaning the drive gears and putting litho grease... -
ir6570 e0004-00103
my cousin have an IR6570. he is facing a problem
the device shows e00004-00103
he has checked LH, POwer, HT PCB board etc and all seems normal... -
Riso suddenly printing very light
So I've got an RC6300,
last weekend I went through about 800 prints and everything was totally fine,
I went to print the reverse... -
MX4100n
Been to a mx-4100n with a mx-rbx3 and a mx-fn10 finisher. the original problem was jamming,mostly pod_1n. i checked all the usual culprits, all ok and... -
Konica minolta c450
There are any way to reset/stop counting of the copies on this machine? and there are something special when to change the image unit something to do... -
Operation Panel/PCB
My understand is that when the Ricoh Aficio 3045 first came out that the touch screen adjustment had to be done periodically to recalibrate the touch...
