Canon ir Adv 8105 Quick menu not working

[amitlama_78]

Hello
Request for help
My quick menu has stopped working......
I tried in the service mode but its not working.
If I do all data Initialization will it solve my problem.
and if i do so is there anything that i have to take care.

Thanks
Regards

[amitlama_78]

Re: Canon ir Adv 8105 Quick menu not working

Any One please suggestion required

[teckat]

Re: Canon ir Adv 8105 Quick menu not working

Any One please suggestion required

Warning:Initialize All Data
Note: all customer data will be lost.

[teckat]

Re: Canon ir Adv 8105 Quick menu not working

Warning:Initialize All Data
Note: all customer data will be lost.

To enable the Quick Menu button on the control panel, set UI-CUSTM to a 1 in service mode (Level 2) under COPIER > OPTION > DSPLY-SW.

[amitlama_78]

Re: Canon ir Adv 8105 Quick menu not working

i DID THE PARTICULAR PROCESS BUT THAT'S NOT WORKING.

[amitlama_78]

Re: Canon ir Adv 8105 Quick menu not working

Warning:Initialize All Data
Note: all customer data will be lost.

What all data will lost....?
Will I be able to use the copier machine after data initilization.
mine is used machine and if i do data initilization what will happen?

[teckat]

Re: Canon ir Adv 8105 Quick menu not working

What all data will lost....?
Will I be able to use the copier machine after data initilization.
mine is used machine and if i do data initilization what will happen?

---

Level 2: COPIER > OPTION > DSPLY-SW > UI-CUSTM

0: deactivate the Quick Menu key------------power off/on Printer-----------is Quick Menu Deactivated ???????

1: activate the Quick Menu key




are u trained on model ?????????????

Do not do a "Initialize All Data"

"settings/registration" > logging in > management settings > data management > initialize all data/settings.
All user settings and (unfortunately) data are returned to default.

what is on your User Data Print out ???

[amitlama_78]

Re: Canon ir Adv 8105 Quick menu not working

I did the what u said but still not working

---

Level 2: COPIER > OPTION > DSPLY-SW > UI-CUSTM

0: deactivate the Quick Menu key------------power off/on Printer-----------is Quick Menu Deactivated ???????

1: activate the Quick Menu key




are u trained on model ?????????????

Do not do a "Initialize All Data"

"settings/registration" > logging in > management settings > data management > initialize all data/settings.
All user settings and (unfortunately) data are returned to default.

what is on your User Data Print out ???

[teckat]

Re: Canon ir Adv 8105 Quick menu not working

I did the what u said but still not working

---

guess u have two other options---------

this site assumes no responsibility on your procedures--- these are only suggestions /
If you are not sure what condition printer will be in after a performance----do not go forth

MMI Clear-----------------make sure to print out P Print settings


MMI = Clear of user mode setting value
Details = To clear the user mode setting values (excluding values for Control Panel, common settings, and FAX).
- Common Settings
- Timer Settings
- Adjustment/Cleaning
- Report Settings
- System Settings
- Copy Settings
- Communications Settings
- Printer Settings
Use case = When clearing various setting values of user mode
Adj/set/operate method
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution = The setting value is cleared after the main power switch is turned OFF/ON.


or
"settings/registration" > logging in > management settings > data management > initialize all data/settings.
All user settings and (unfortunately) data are returned to default.

what is on your User Data Print out ???