Canon IRC 3200 warming up

[xcopytech]

Have constant message warming up.
There is no any fault code on screen.

[Van Steal]

Check DENS in service mode, which ever one is 3/4% away from 0 replace toner bottle for that colour. If that doesn't work replace that drum.

[pinheiro]

Hi
Check in service mode Dens the value for each individual colour. The normal value would be between 0 and 1. If you have a colour with a value around 4 or 5 you have an issue with the toner/starter concentration level for that colour. By replacing that Drum Unit you will temporarily resolve the issue due to the Developer Assembly being incorporated with the Drum Unit, To resolve this issue replace the Toner Cartridge Drive Assembly - FG6-8999-000 and the corresponding Drum Unit. Before replace those parts, check if the Toner Cartridge is supplying or not the toner due to the broken inside stirrer.
Thanks

[badboys]

Had this similar problem once where the yellow toner clogged & choke. Replace it & everything OK......good luck.

[pga]

tried change yellow or black drum unit. do the fixing unit working condition?

[blazebusiness]

If you are still having trouble then check the toner cartridge drive assy or toner cartridge broken stirrer or toner is clogged as per pinheiro's advice in his post

[SCREWTAPE]

Bad drums can cause this as well.

Bad memory DIMMs on the Main Controller can caused this as well.

Does the fuser unit get hot?

[xcopytech]

Thanks everyone for answers. Fuser unit get hot and will check all rest posts and post here solution.

[SCREWTAPE]

Thanks everyone for answers. Fuser unit get hot and will check all rest posts and post here solution.

At least that's not the issue. Process of elimination.

[xcopytech]

Customer forced print with emptu toner and destroyed yellow drum unit.

Thanks everyone for help

[SCREWTAPE]

Umm.

Glad you figured out.

[badboys]

"Customer forced print with empty toner"...???
They must be damp desperate i should say.....