Canon IRC 3200 with E01-04

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tmanamore
    Technician

    50+ Posts
    • Sep 2009
    • 74

    #1

    [Error Code] Canon IRC 3200 with E01-04

    What does an error E01-04 point to and how do i fix it?
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Originally posted by tmanamore
    What does an error E01-04 point to and how do i fix it?

    Post the correct & complete ERROR CODE


    E01?-04 ?
    E01 ??
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • tmanamore
      Technician

      50+ Posts
      • Sep 2009
      • 74

      #3
      E000001-00004

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #4
        Originally posted by tmanamore
        E000001-00004
        E001-0004call for Canon Service to inspect

        H1.JPG
        When paper is stuck up inside/ it can be difficult to remove
        with unit removed/ release the locking handle-to release pressure of rollers/
        FIX U.JPG

        u may be able to remove paper then/

        DO NOT TURN THE WHITE GEAR TO WIND OUT PAPER/
        IT WILL ONLY RE-WRAP PAPER IN UNIT


        If u are lucky with this, u will need to clear the error in service mode
        KEY.JPG
        Search & Select under
        COPIER>FUNCTION><CLEAR>
        ERR
        Clears error codes.
        (Cleared error codes: E000, E001, E002, E003, E719)
        Operation = Select this item, and press the OK key.
        Turn the main power OFF/ON.

        Last edited by teckat; 02-14-2011, 11:10 PM.
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • tmanamore
          Technician

          50+ Posts
          • Sep 2009
          • 74

          #5
          Once the problem has been identified and fixed, how do I reset the code?

          Comment

          • teckat
            Field Supervisor

            Site Contributor
            10,000+ Posts
            • Jan 2010
            • 16083

            #6
            Originally posted by tmanamore
            Once the problem has been identified and fixed, how do I reset the code?

            See above on how to enter service mode & clear error
            **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • tmanamore
              Technician

              50+ Posts
              • Sep 2009
              • 74

              #7
              Thank you so much.

              Comment

              • teckat
                Field Supervisor

                Site Contributor
                10,000+ Posts
                • Jan 2010
                • 16083

                #8
                ELVIS.jpg
                **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                Working...