Hello, thank you all, I am new to the community, my problem with the machine is:
On a vertical letter sheet that is placed in tray 1 and 2, it gets...
500 results in 0.1273 seconds.
-
bizhub 601 paper jams in reverse registration
-
-
HP M652 Firmware update stuck.
Have a HP M652 I am attempting to update firmware via USB stick and it seems to be stuck, has been updating for 30 minutes. Can I unplug it or will I... -
c250i stuck on boot screen
Hello,
I have a Konica C250i stuck on 25%- 50% boot screen, I have tried to do a FW and recovery tool but the machine does't respond, just... -
Lbcoaster started a topic [Misc] Sharp MX 453 When you do a 2 to 2 or 2 to 1 duplex it get stuck in job statusin SharpSharp MX 453 When you do a 2 to 2 or 2 to 1 duplex it get stuck in job status
Sharp MX 453 When you do a 2 to 2 or 2 to 1 duplex it get stuck in job status saying Waiting
Things we have tried:
Duplex is not d... -
Bizhub C250i FS-539SD jamming code J7225
Hi all,
As per the title we have this device in a church & it jams every time in the booklet maker with the jam code J7225 @PS12 (this... -
C658 Error 30-3
Good Evening Gents,
I have 2 Konica C658 with the same error 30-3. It seems the paper get stuck causing the jam.
We've cleaned... -
C454 floor finisher paper stuck top
Hello, does anyone have a tip?
A customer has a floor finisher on a C454, and paper gets stuck at the top. It appears the rolls can't grab down... -
hp designjet t1600 screen stuck on logo HP at startup
Good morning
I have an HP designjet t1600 printer that gets stuck on the HP logo screen on startup.
How do I access the diagnostic mode menu?... -
konica minolta c3320i stuck job
I am hoping this is the right page for the color printer c 3320i the copiier just runs and runs.. until we clear stuck jobs.. it is only one that... -
HP Laserjet 700 ( M712 ) fuser stuck and bending corners
Hi all , went out to look at an old HP M712 printer that was randomly bending some corners , i went to take the fuser out , which is not complicated ,... -
Xerox 700 - 093-317 nvm reset code
Hi
I have a Xerox 700 that seems to be stuck with the 093-317 error, seems like one of the black toners ran empty and triggered and users... -
FN22 Staple jam
Working on a FN22 that getting staple jams. the staple seams to get stuck the the top part of the staple unit, the staple doesn't get trimmed or crimped.... -
MX-M7570 upper web sticking
Good morning
Have an MX-M7570 that recently started to have the upper web start sticking. Have tried several things so far.
... -
Xerox 700 paper getting stuck 1/2 way in the Fuser
I have an old Xerox 700 and when I print the paper get stuck in the middle of the fuser so obviously half printed. I thought it's the fuser and purchased...
