C3200-C1 removal

[kuby]

I need to remove a bad ImagePass C1 from a C3200. Is there a board I have to put back in the copier when I take the other one out and remove the imagepass box?

Thanks

[teckat]

i need to remove a bad imagepass c1 from a c3200. Is there a board i have to put back in the copier when i take the other one out and remove the imagepass box?

Thanks

i/f pcb + c boot rom-

[ATTACH=CONFIG]9256[/ATTACH]

[kuby]

I know I have to remove the I/F pcb but is there a card I need to put back in its place?

Thanks

[mrfixit51]

There is no card needed to replace the I/F board, and if it is to be a copier only, then it already has the C boot rom in it from the imagePASS configuration...

[kuby]

It is going to be networked, the ethernet port seems to be live, I was trouble shooting the machine to find out what was wrong and confirmed the system software in the machine through the ethernet card in the copier.

[mrfixit51]

The ethernet port will work to load software, and allow the customer to utilize RUI as it sits. But to print to it, you will need a network boot rom and the Color Network Multi-PDL Printer Kit-
A1 or A2. I can't recall, but I think the NBoot rom is in that kit, Teckat has a better handle on what is in them, I think he has the Canon configurator book at his disposal...

[kuby]

Yea already got one on the way....thanks

[charm5496]

The PDL printer kit A2 will work on the 3200 and 3220 and comes with the boot rom and what is called a SURF board which assist in the processing of images.

[mrfixit51]

Thanks for the "assist" Charm... ;-)

[charm5496]

anytime dude